Chrome HID Headlights Pair w/ LED DRL w/o AFS for Infiniti QX60 (2016-2019)
$606.95
Skip to product information
Chrome HID Headlights Pair w/ LED DRL w/o AFS for Infiniti QX60 (2016-2019)
$606.95
DS-260609NF0D
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed headlights on your 2016-2019 Infiniti QX60 with this new chrome HID pair with LED DRL for SUVs without AFS. Reuse your stock D2S bulbs.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2016-2019 | Infiniti QX60 with factory HID, WITHOUT AFS | Factory HID headlights |
Will NOT fit: AFS models; 2014-2015 QX60 / JX35.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low beam: D2S HID (reuse stock, per listing)
- Running lights: LED DRL
- AFS: No
- Housing: Chrome
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 260609NF0D, 260109NF0D. Partslink: IN2502175, IN2503175.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
- HID bulbs and ballasts are NOT included; reuse your factory ones
Installation
- Disconnect the negative battery cable (factory xenon system). Open the hood and remove the clips along the top of the grille and the two at each side of the bumper.
- Turn the wheel, remove the Phillips screws and rear lower 10 mm bolt, pull back the fender liner and detach the wheel-opening molding.
- Remove the two 10 mm bumper-to-fender bolts per side, then release the two clips under each headlamp and swing the bumper cover out (rest it on a crate).
- Remove the headlamp bolts, unplug the lamp and lift it out, protecting the fender edge with tape.
- Per Infiniti bulletin ITB19-014, if the new lamp has a locating bracket on top center (T10 Torx), remove and discard it before installing.
- Install in reverse, reuse your factory bulbs and ballasts, and have the aim checked.
Steps compiled from Infiniti service bulletin ITB19-014 (2014-2020 QX60 headlamp locating bracket); InfinitiScene "replacing headlight assembly" thread; InfinitiQX60.org "Help replacing ballast" thread. Professional installation and headlight aiming are recommended.
FAQs
Does this fit an AFS QX60?
No. See our AFS version.
Will it fit the 2014-2015 QX60?
No. 2016-2019 facelift only.
Do I need to remove the front bumper to replace these headlights?
Yes. The front bumper cover comes off to reach the headlamp bolts.
Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.