Chrome HID Headlights Pair w/ LED DRL w/o Auto Leveling for Audi A6 / S6 (2012-2015)
$614.95
Skip to product information
Chrome HID Headlights Pair w/ LED DRL w/o Auto Leveling for Audi A6 / S6 (2012-2015)
$614.95
DS-4G0941044E
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace damaged headlights on your 2012-2015 Audi A6 or 2013-2015 S6 with this new chrome HID pair for cars without auto leveling. Reuse your D3S bulbs; LED and turn lights included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2012-2015 | 2012-2015 Audi A6 / A6 Quattro and 2013-2015 S6 with HID, WITHOUT auto-level lamps | Factory HID headlights |
Will NOT fit: Auto-level cars; full-LED headlights; 2016+ facelift.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low beam: D3S HID (not included, per listing)
- Turn: PSY 12V24W
- Running lights and side marker: LED (included)
- Housing: Chrome
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 4G0941044E. Partslink: AU2503170, AU2502170.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
- HID bulbs and ballasts are NOT included; reuse your factory ones
Installation
- Turn the light switch to 0, switch off the ignition and remove the key (HID high voltage).
- Open the hood, remove the two push pins and upper cover, then the two top bumper screws; from underneath remove the seven lower screws.
- Turn the wheels outward, remove the fender-liner screws and the corner screws, then the inner screw through each wheel arch; release the fender clips and pull the bumper off, unplugging connectors and washer hoses.
- Remove the outer headlamp bolts, loosen the remaining bolt four turns, slide the lamp forward (do not trap the vent hose) and unplug it.
- Install with the adjusting nuts turned all the way down, align the lamp flush with the fender, tighten the bolts and adjust the aim.
Steps compiled from Audi A6 Typ 4G repair manual "Headlamp, Removing and Installing" (HID through MY2014 / from MY2015); remont-bampera.com Audi A6 C7 bumper removal; Go-Parts 2012-2018 A6 headlight guide. Professional installation and headlight aiming are recommended.
FAQs
Will this fit a car with auto leveling?
No, per the listing.
Does it fit the 2016+ A6?
No. The facelift lamps are a different shape.
Do I need to remove the front bumper to replace these headlights?
Yes. The front bumper cover comes off to reach the headlamp bolts.
Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.