Chrome HID Projector Headlights Pair for Nissan 370Z (2009-2020)

Replace yellowed or damaged headlights on your 2009-2020 Nissan 370Z with this brand-new pair of chrome HID/Xenon projector headlight assemblies. Half assembly: reuse your D2S bulbs, ballasts and high-voltage wires.

Fitment

Will NOT fit: Black-bezel cars (choose matching bezel); Nismo-specific lamps.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low/high beam: D2S HID (not included)
• Turn signal: 12V21/5W (included)
• Side marker: LED (included)
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 260101EA0C, 260101EA0A, 260101EA0B, 260601EA0A, 260601EA0B. Partslink: NI2502195, NI2503195.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Half assembly: HID bulbs, ballasts, and high-voltage wires are NOT included; reuse yours

Installation

1. Remove the seven plastic push clips across the top of the bumper.
2. Turn the wheels, remove the inner-fender clip and pull the liner back, then remove the 10 mm bumper-to-fender bolt each side.
3. Remove the eight 10 mm bolts under the bumper, pull it forward and unplug the fog lights.
4. Remove the radiator-cover clips, the rubber-strip clip and push clips, then the 10 mm headlight bolts; on the driver side free the hood-release cable.
5. Unplug the rear harness, pull the headlight forward and up, transfer bulbs/ballasts, install in reverse and aim.

Steps compiled from The370Z.com DIY and a 2010-2018 370Z bumper removal video. Professional installation and headlight aiming are recommended.

FAQs

What bulbs do these headlights use?
Low/high beam is a D2S 35W HID bulb (not included). The turn signal bulb is included and the side marker is LED.

Can I install LED or HID bulbs?
These are already HID housings.