Chrome LED Projector Headlights Pair with LED DRL for Toyota Corolla CE / L / LE / LE Eco (2017-2019)
$203.95
Skip to product information
Chrome LED Projector Headlights Pair with LED DRL for Toyota Corolla CE / L / LE / LE Eco (2017-2019)
$203.95
DS-8115002M70
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2017-2019 Toyota Corolla CE, L, LE and LE Eco with the factory combination lamp (LED low beam, halogen high beam, and LED DRL). They will not fit 2019-2022 Corolla SE, XSE or XLE, which use a different lamp. If you have a 2019-2022 SE, XSE or XLE, we carry that LED pair here. They also will not fit 2020 and newer Corolla (E210).
Replace faded or cracked 2017-2019 Corolla CE, L, LE or LE Eco headlights with this OE-style chrome-housing pair. Each lamp has a built-in LED low beam, a halogen high-beam chamber, an integrated LED daytime running light, and an amber side marker. It bolts to the factory points and plugs into the factory connectors, with no splicing. Reuse your 9005 high-beam bulbs, or add new ones.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2017-2019 | Toyota Corolla CE, L, LE, LE Eco | LED low beam + halogen high beam + LED DRL. Not 2019-2022 SE / XSE / XLE. Not 2020+ E210. |
Specs
- Sold as: driver and passenger pair
- Housing: chrome, clear lens, amber side marker
- Low beam: built-in LED (no bulb)
- High beam: 9005 (bulb not included)
- Daytime running light: built-in LED
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side LED projector headlight
- Passenger-side LED projector headlight
High-beam bulbs are not included. Low beam and the daytime running light are built into each lamp.
Interchange References
Replaces the original assemblies commonly crossed with 81150-02M70, 81110-02M70, TO2502249, TO2503249.
Installation: Toyota Corolla CE / L / LE / LE Eco (2017-2019)
On the 2017-2019 Corolla the front bumper cover is loosened or removed so you can reach the headlight bolts at the top and sides. Work with a helper and a shop manual for your year. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.
- Open the hood. Remove the clips and fasteners along the top of the bumper cover and grille.
- Remove the fasteners in each front wheel liner and at the bumper corners. Ease the cover forward enough to reach the headlight bolts, or set it aside.
- Unplug the headlight connector, remove the mounting bolts, and lift the lamp out.
- Transfer your 9005 high-beam bulbs if you are reusing them. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plug.
- Refit the bumper cover, reconnect the battery, and test low beam, high beam, DRL and turn signal before you drive. Aim the beams after installation.
Frequently Asked Questions
Which vehicles do these headlights fit?
2017-2019 Toyota Corolla CE, L, LE, and LE Eco with this combination lamp (LED low beam, halogen high beam, LED DRL). They do not fit 2019-2022 SE, XSE or XLE, or 2020 and newer Corolla.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Are these halogen-only lamps?
No. Low beam and the daytime running light are built-in LED. High beam uses a 9005 halogen bulb, which is not included.
Are bulbs included?
No. Low beam and DRL are built into the lamp. Reuse your 9005 high-beam bulbs, or add new ones.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.