Chrome Projector Halogen Headlights Pair for GMC Acadia (2007-2012)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
New chrome-housing projector halogen headlight pair for the 2007-2012 GMC Acadia. H7 projector. Bulbs are not included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2007-2012 | GMC / Acadia (1st gen) | Factory halogen headlights |
Will NOT fit: 2013-2016 Acadia (facelift), Acadia Denali, Saturn Outlook, Buick Enclave or Chevrolet Traverse.
Common Reasons to Replace
- Yellowed, hazy, or cracked factory lenses cutting light output
- Moisture or condensation inside the housing
- Broken mounting tabs or collision damage
- Refreshing the front end with a new chrome look
Specs
- Light type: Halogen projector (H7)
- Housing: Chrome, clear lens
- Bulbs: Low/high beam H7, turn signal T15, side marker T10 (bulbs NOT included)
- Lens: Polycarbonate; housing: polypropylene
- DOT & SAE compliant
- Fitment type: Direct replacement, plug-and-play connectors
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 20912393, 20912394, 25826764, 25826765 · Partslink: GM2502294, GM2503294
What's Included
- 1 x Driver-side headlight assembly
- 1 x Passenger-side headlight assembly
- Bulbs not included — fits Low/high beam H7, turn signal T15, side marker T10
Installation (2007-2012 GMC Acadia)
Tools: 10 mm socket and ratchet, T15 Torx, push-pin tool.
- Disconnect the negative battery cable.
- Remove the upper radiator cover push pins and grille fasteners.
- Remove the front fascia fasteners in the wheel wells and underneath, and remove the fascia.
- Remove the headlight bolts and pull the lamp forward.
- Unplug, install the new lamp, reconnect and test.
- Refit the fascia and aim.
Steps based on GM Lambda (Acadia 2007-2012) service information headlamp procedure.
FAQ
Will these fit a Chevy Traverse or Buick Enclave?
No. They share the platform but each uses its own headlight.
Will these fit a 2013 Acadia?
No. The 2013 facelift changed the headlights.
What bulb sizes do these use?
Low/high beam H7, turn signal T15, side marker T10 (bulbs NOT included).
Can I put LED bulbs in these?
Yes. These are halogen housings, so H7 LED conversion kits fit. Use a quality kit with a CANbus decoder if you see flicker or a bulb-out warning, and re-aim the beams after install.