Chrome Tail Lights Pair for Nissan Titan (2017-2023) / Titan XD (2016-2023)
$144.95
Skip to product information
Chrome Tail Lights Pair for Nissan Titan (2017-2023) / Titan XD (2016-2023)
$144.95
DS-26550EZ23D
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These tail lights fit Nissan Titan (2017-2023) and Titan XD (2016-2023), including S, SV, SL, PRO-4X, Platinum, and Platinum Reserve. They will not fit 2004-2015 Titan. These are factory-style replacement housings, not an aftermarket LED-tube or sequential set. Compare your current housings with our photos before ordering.
Refresh a 2017-2023 Titan or a 2016-2023 Titan XD with this chrome tail light pair. You get driver and passenger assemblies with a red and clear lens in a chrome housing. Bulbs are included. The housings use the factory mounting points and factory-style connectors.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2017-2023 | Nissan Titan | S, SV, SL, PRO-4X, Platinum, Platinum Reserve. Not 2004-2015 |
| 2016-2023 | Nissan Titan XD | Same generation housing |
Specs
- Sold as: a driver and passenger pair
- Style: chrome housing, red and clear lens
- Lighting: factory-style tail, brake, turn, and reverse; bulbs included
- 12 V
- New aftermarket assemblies
In the Box
- Driver and passenger chrome tail lights
- Bulbs
Interchange References
Replaces original-style 2017-2023 Titan and 2016-2023 Titan XD tail lights commonly crossed with 26550-EZ23D, 26555-EZ23D, 26550-EZ20D, 26555-EZ20D, NI2800213, and NI2801213.
Installation: Nissan Titan (2017-2023) and Titan XD (2016-2023)
On these trucks the tail lights bolt to the bedside and are reached with the tailgate open. Professional installation is recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Open the tailgate. From the bed opening, locate the bolts on the face of each tail light housing.
- Remove the bolts and pull the housing straight back out of the bedside. Do not pry on the lens.
- Unplug the factory connector.
- Plug the factory connector into the new housing until it clicks, set the housing into the opening, start the bolts by hand, then tighten them evenly.
- Repeat on the other side. Reconnect the battery and check tail, brake, turn, and reverse functions before you drive.