Clear Lens Tail Lights Pair for Ram 1500 Halogen (2009-2018)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
A cloudy factory lens makes a halogen Ram look tired from behind, and this clear pair puts a chrome housing and a sharp red brake chamber back on that corner. GENSSI's set is a left and right assembly for halogen 2009-2018 Ram 1500 and 2010-2018 2500 and 3500 trucks, not a factory LED lamp, and the factory sockets twist in with no splicing.
Important Fitment Note: Factory halogen trucks only. A 2009 Ram 2500 or 3500 uses a different lamp. Factory LED tails do not use this housing.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2009-2018 | Ram / 1500 halogen | Yes |
| 2010-2018 | Ram / 2500 halogen | Yes |
| 2010-2018 | Ram / 3500 halogen | Yes |
| 2009 | Ram / 2500 and 3500 | No |
Specs
- Style: Chrome housing with a clear lens over red brake chambers
- Bulbs: Incandescent halogen. Two red 3157 brake and turn bulbs and two clear 921 reverse bulbs are in the box
- Sold as: Pair — left and right clear halogen tail lights, plus four bulbs
- Fit: Factory halogen tail lights on the 2009-2018 Ram 1500 and the 2010-2018 Ram 2500 and 3500. Factory harness, no splicing
Interchange
55277415AA, 55277414AA
What's included
- 1x Driver (left) clear tail light
- 1x Passenger (right) clear tail light
- 2x Red 3157 bulbs
- 2x Clear 921 reverse bulbs
Installation — Ram 1500 Halogen (2009-2018)
- Confirm the truck left the factory with halogen tails. A factory LED lamp is a different housing, and a 2009 Ram 2500 or 3500 uses a different lamp.
- The tool is a T25 Torx bit. Open the tailgate so the inner edge of the lamp is reachable.
- Remove the two T25 screws on the inner edge of the housing.
- Pull the lamp straight out from the bed side. The outer edge is held by plastic retainers. Support the housing. Do not hang it from the wires.
- Twist the brake and reverse sockets out of the old lamp. The box includes two red 3157 bulbs and two clear 921 reverse bulbs.
- Lock the sockets into the new housing. Line the outer retainers up and push the lamp into the bed side until they seat.
- Reinstall the two T25 screws snug. Do not overtighten them into the plastic. Check park, brake, both turn signals, and reverse, then repeat on the other side.
Buyer FAQ
Will this fit a factory LED Ram? No. This pair is the halogen housing. Factory LED tails are a different assembly.
What is in the box? Left and right clear tail lights, two red 3157 bulbs, and two clear 921 reverse bulbs. Left replaces 55277415AA. Right replaces 55277414AA.
Does a 2009 Ram 2500 fit? No. The 2009 Ram 2500 and 3500 use a different lamp. 2010-2018 halogen 2500 and 3500 trucks do fit, along with the 2009-2018 Ram 1500 halogen.