Clear Lens Tail Lights Pair w/ Bulbs for Chevy Colorado (2015-2022)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
The factory red lens on a second-gen Colorado reads dull once it hazes, and this clear pair turns that rear into a bright black-and-clear face while the red 7443 bulbs keep the brake hit obvious at night. GENSSI's set is a left and right assembly for the 2015-2022 Colorado, not a Canyon lamp and not a lens cover, and it plugs into the factory harness.
Important Fitment Note: Second-generation Chevy Colorado only. The 2004-2012 Colorado uses a different lamp, and this pair does not fit the GMC Canyon.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2015-2022 | Chevrolet / Colorado, halogen tail lamps | Yes |
| 2004-2012 | Chevrolet / Colorado | No |
| 2015-2022 | GMC / Canyon | No |
Specs
- Style: Black housing with a clear lens for factory halogen-bulb Colorado tail lamps
- Bulbs: Incandescent. Four red 7443 bulbs are included for brake, tail, and turn. Each housing has its own plug-in harness. The 921 reverse bulb is not in the box
- Sold as: Pair — left and right tail light assemblies, with four red 7443 bulbs
- Fit: Direct replacement for 2015-2022 Chevy Colorado trucks with factory halogen tail lamps, including WT, LT, Z71, and ZR2. Factory harness, no splicing
Interchange
84916711, 84916712, 84169777, 84169778, 84630992, 84630993, GM2800270, GM2801270
What's included
- 1x Driver (left) clear lens tail light
- 1x Passenger (right) clear lens tail light
- 4x red 7443 bulbs
Installation — Chevy Colorado (2015-2022)
- Park, switch the ignition and lights off, and lower the tailgate. Tools are a Torx T15 driver and a plastic trim tool.
- On the inner edge of the lamp, exposed with the tailgate down, remove the two Torx T15 screws.
- Pull the lamp straight rearward until the two pegs release from the grommets in the bed corner. If it sticks, pry the outer front edge with a plastic tool. Do not use metal against the paint. Rest the lamp on a towel on the bumper.
- Squeeze the lock and unplug the factory harness from the old lamp. The new housing already has its own plug and three sockets.
- Install two included red 7443 bulbs in the brake and turn sockets on the new lamp. Move the factory 921 reverse bulb into the reverse socket. Plug the new harness into the factory connector. Nothing is spliced.
- Line the pegs up with the grommets, press the lamp on, and reinstall the two T15 screws snug. Do not overtighten them into the plastic.
- Check park, brake, both turn signals, and reverse before you close the tailgate. Repeat on the other side.
Buyer FAQ
Is this a clear cover over the factory lamp? No. These are full left and right housings with a clear lens. The red brake color comes from the four included 7443 bulbs.
What about the reverse bulbs? The 921 reverse bulbs are not in the box. Move each factory reverse bulb into the reverse socket on the new lamp. The housing plugs into the factory harness.
Which trucks fit? 2015-2022 Chevy Colorado trucks with factory halogen tail lamps, including WT, LT, Z71, and ZR2. Left replaces 84916711. Right replaces 84916712. The 2004-2012 Colorado and the GMC Canyon do not use this lamp.