GENSSI hero — dark red tail lights pair for Ford Ranger (2001-2011) on white

Dark Red Tail Lights Pair for Ford Ranger (2001-2011)

$102.95
Skip to product information
GENSSI hero — dark red tail lights pair for Ford Ranger (2001-2011) on white

Dark Red Tail Lights Pair for Ford Ranger (2001-2011)

$102.95
DS-RANGER-TAIL-DK-RED-PAIR-2001-2011

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

A sun-faded red lens leaves a Ranger looking plain from behind, and this dark cherry pair deepens that lamp by day while the clear reverse window still throws a white light when you back up. GENSSI's set is a left and right assembly for 2001-2011 Styleside Rangers, not the 2006-2007 STX lamp, and the factory sockets twist in with no splicing.

Important Fitment Note: Styleside Rangers from 2001-2011. The 2006-2007 Ranger STX uses the Mazda-bed lamp, and Mazda B-series trucks do not use this housing.

Fitment

YEAR MAKE / MODEL FITS
2001-2011 Ford / Ranger, Styleside Yes
2006-2007 Ford / Ranger STX No

Specs

  • Style: Black housing with a dark cherry red lens and a clear reverse window
  • Bulbs: Incandescent. Bulbs and sockets are not in the box. Brake and turn is a 3157 on 2001-2004 Rangers and a 4157 on 2005-2011 Rangers. Reverse is a 3156
  • Sold as: Pair — left and right tail light assemblies. Bulbs and sockets are not included
  • Fit: Direct replacement for 2001-2011 Ford Ranger Styleside trucks. Factory sockets, no splicing

Interchange

1L5Z-13405-BA, 1L5Z-13405-CA, 6L5Z-13405-AA, 1L5Z-13404-BA, 1L5Z-13404-CA, 6L5Z-13404-AA

What's included

  • 1x Driver (left) dark red tail light
  • 1x Passenger (right) dark red tail light

Installation — Ford Ranger (2001-2011)

  1. Lower the tailgate. The only tool is a Phillips screwdriver.
  2. Remove the two Phillips screws on the outboard face of the lamp. They are the longer screws. Then remove the two shorter Phillips screws on the inner edge, beside the open tailgate.
  3. Support the housing as the last screw comes out and pull it straight back off the alignment pins. Do not hang it from the wires.
  4. Twist the brake socket and the reverse socket a quarter turn counterclockwise and pull them out. The sockets are not in the box.
  5. Lock those sockets into the new housing. Brake and turn is a 3157 on a 2001-2004 Ranger and a 4157 on a 2005-2011 Ranger. Reverse is a 3156.
  6. Seat the pins, start the inner screws, then the outer screws. Snug them. Do not overtighten or the lens can crack.
  7. Check park, brake, both turn signals, and reverse before you raise the tailgate. Repeat on the other side.

Buyer FAQ

Does this fit a 2006 STX? No. The 2006-2007 Ranger STX uses the Mazda-bed tail lamp. Mazda B-series trucks do not use this housing either.

Are the bulbs in the box? No. Move the factory sockets. Brake and turn is a 3157 through 2004 and a 4157 from 2005 on. Reverse is a 3156.

Which Rangers fit? 2001-2011 Styleside Rangers. Left replaces 1L5Z-13405-BA, 1L5Z-13405-CA, and 6L5Z-13405-AA. Right replaces 1L5Z-13404-BA, 1L5Z-13404-CA, and 6L5Z-13404-AA.

You may also like