GENSSI hero — dark smoke tail lights pair for Dodge Dakota (1997-2004) on white

Dark Smoke Tail Lights Pair w/ Bulbs for Dodge Dakota (1997-2004)

$119.95
Skip to product information
GENSSI hero — dark smoke tail lights pair for Dodge Dakota (1997-2004) on white

Dark Smoke Tail Lights Pair w/ Bulbs for Dodge Dakota (1997-2004)

$119.95
DS-DAKOTA-TAIL-DK-SMOKE-3157-PAIR-1997-2004

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

A hazed red lens makes a second-gen Dakota look dull from a car length back, and this dark smoke pair deepens that rear by day while the red 3157 still throws a clear brake at night. GENSSI's set is a left and right assembly for the 1997-2004 Dakota, not the earlier truck and not a lens cover, and the factory sockets twist in with no splicing.

Important Fitment Note: Second-generation Dakota only. The 1988-1996 Dakota and the 2005-2011 Dakota use different tail lamps.

Fitment

YEAR MAKE / MODEL FITS
1997-2004 Dodge / Dakota, all trims Yes
1988-1996 Dodge / Dakota No
2005-2011 Dodge / Dakota No

Specs

  • Style: Black housing with a dark red smoke lens
  • Bulbs: Incandescent. Two red 3157 bulbs are included for brake, tail, and turn. Reverse is a 3156 and is not in the box. Sockets are not included
  • Sold as: Pair — left and right dark smoke tail lights, with two red 3157 bulbs
  • Fit: Direct replacement for every 1997-2004 Dodge Dakota. Factory sockets, no splicing

Interchange

55055113, 55055112, CH2800126, CH2801126

What's included

  • 1x Driver (left) dark smoke tail light
  • 1x Passenger (right) dark smoke tail light
  • 2x red 3157 bulbs

Installation — Dodge Dakota (1997-2004)

  1. Lower the tailgate. The tool is a T20 Torx driver. If the screw does not take a T20, it is a T25.
  2. Remove the two Torx screws on the inner edge of the lamp.
  3. Pull the lamp straight back. The outer side is held by clips, so pull evenly and support the housing. Do not hang it from the wires.
  4. Twist the brake socket and the reverse socket counterclockwise and pull them out. The sockets are not in the box.
  5. Put an included red 3157 in the brake socket. Move the factory 3156 into the reverse socket.
  6. Lock the sockets into the new housing. Line the lamp up, press it on until the clips seat, and reinstall the two Torx screws snug. Do not overtighten them into the plastic.
  7. Check park, brake, both turn signals, and reverse before you raise the tailgate. Repeat on the other side.

Buyer FAQ

Is this a smoke film? No. These are full left and right housings. The smoke is molded into the lens.

What about the reverse bulb? The 3156 reverse bulbs are not in the box. Two red 3157 brake bulbs are included. Move the factory reverse sockets.

Which Dakotas fit? Every 1997-2004 Dakota. Left replaces 55055113. Right replaces 55055112. The 1988-1996 and 2005-2011 trucks use different lamps.

You may also like