Full LED Headlights Pair for Dodge Challenger (2008-2014)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Upgrade your 2008-2014 Challenger from dated factory lights to a full LED front end with a crisp white DRL ring and a sharper beam. GENSSI supplies this vehicle-specific left-and-right pair as plug-and-play assemblies, not a universal bulb kit or lens swap.
Important Fitment Note: This is a pair of full LED headlight assemblies (driver and passenger) for the 2008-2014 Dodge Challenger. It replaces the factory headlight housings and is not a bulb-only upgrade.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2008-2014 | Dodge Challenger | Yes |
Specs
- Type: Full LED headlight assemblies with DRL, left & right
- Style: Full LED - plug-and-play, no splicing
- Housing color: Black
- Lens color: Clear
- Placement: Front, driver & passenger side
- Sold as: Pair (2 pieces)
- Mounting: Screws
Interchange
5028780AD, 5028780AE, 5028781AD, 5028781AE, CH2502219, CH2503219
What's included
- 1 x pair full LED headlight assemblies with DRL (driver side & passenger side)
Installation — Dodge Challenger (2008-2014)
- Open the hood and pull off the black plastic radiator cover to clear the top of the headlight openings.
- Remove the front bumper cover fasteners (upper clips / bolts, wheel-liner fasteners, and lower screws) so you can pull the cover forward enough to free the lower headlight bolts — 2008-2014 Challenger full assemblies typically need the cover out of the way.
- Remove the headlight fasteners (commonly 8 mm — upper and lower mounts), disconnect the harness, and pull the housing forward out of the fender.
- Plug the new Full LED assembly into the factory connector, seat it on the mounts, and reinstall the bolts snug.
- Refit the bumper cover and radiator cover, then test low beam, high beam, turn signal, and DRL before aiming.
Buyer FAQ
Do these look like a cheap bulb upgrade? No. These are complete full LED headlight assemblies with a DRL ring that replace the factory housings, not bulbs or overlays.
Do I need to cut or splice wiring? No. This pair is a plug-and-play full LED replacement for the 2008-2014 Challenger.
What is in the box, and what does it interchange with? One left and one right full LED headlight assembly. Interchanges with OEM 5028780AD, 5028780AE, 5028781AD and 5028781AE, plus Partslink CH2502219 and CH2503219.