Full LED Headlights Pair for Toyota Camry (2018-2020)

This full LED pair gives the 2018-2020 Camry a darker, more finished housing than the factory lamps — a strong DRL, projector beams, and a clean cutoff in the pre-facelift opening.

Features

• Full LED housings. High beam, low beam, DRL, and turn signals are built into the pair, on a 12V system as documented for this design.
• Built for the 2018-2020 Camry opening. The housing follows the pre-facelift XV70 lamp shape and does not fit the 2021-2024 facelift front.
• Black housings with a clear lens. The internal layout is a full-LED design, distinct from our clear DRL sequential Camry pair.
• Sold as a complete pair. You get both the driver-side and passenger-side assemblies. Professional installation is recommended.

Signs It's Time to Upgrade Your Headlights

• The factory 2018-2020 headlights have dulled, and the front no longer looks as sharp as the rest of the Camry.
• You want a full LED housing in the pre-facelift opening, with a stronger DRL after dark.
• You are refreshing an SE, XSE, or hybrid and want the front lighting to feel current.
• You confirmed your Camry is 2018-2020, not the 2021 facelift.

Why Drivers Love This LED Pair

• The full LED housing gives the 2018-2020 Camry a darker, cleaner front than the factory lamps.
• The pair is shaped for the pre-facelift opening, so it sits flush.
• We ship a matched pair with high beam, low beam, DRL, and turn signals in the housings.
• A 1-year warranty stands behind the pair.

Specifications

• Fitment: 2018-2020 Toyota Camry (does not fit 2021-2024 facelift)
• Lighting: Full LED
• Functions: DRL, turn signal, high beam, low beam
• Power: 12V system
• Housing / lens: Black housing, clear lens
• Warranty: 1 year
• Sold as: Pair (driver and passenger)

What's in the box

• Driver-side (left) headlight assembly
• Passenger-side (right) headlight assembly

Installation on the 2018-2020 Toyota Camry

The front bumper cover has to come off. Disconnect the battery. Pop the push pins on the upper radiator cover and remove the top bumper bolts. Remove the wheel-well screws and the underside fasteners, then pull the bumper corners off the fender clips and lift the cover away (unplug fog lights or sensors if equipped). Unbolt each headlight, pull the assembly forward, and unplug the harness. Set the new housings in place, reconnect, and test high beam, low beam, DRL, and turn signals before the bumper goes back on. Refit the bumper and aim the lights. Professional installation is recommended.

FAQ

Will this fit a 2021-2024 Camry?
No. The 2021 facelift changed the headlights and front end. This pair is for 2018-2020 Camry only.

Do I have to remove the bumper?
Yes. The front bumper cover has to come off to reach the headlight bolts on the 2018-2020 Camry.

What warranty do we include?
These headlights are covered by a 1-year warranty.