Full LED Headlights Pair w/ AFS & LED Module for Infiniti Q60 (2017-2022)
$1,254.95
Skip to product information
Full LED Headlights Pair w/ AFS & LED Module for Infiniti Q60 (2017-2022)
$1,254.95
DS-260105CH1A
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace cracked or fogged headlights on your 2017-2022 Q60 with this brand-new full LED pair with adaptive (AFS) function and LED module.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2017-2022 | Infiniti Q60 coupe with factory adaptive (AFS) LED headlights | Factory LED headlights |
Will NOT fit: Q60 without AFS (one plug); Q50; 2014-2015 Q60.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam, DRL, turn: built-in LED
- AFS: Yes
- LED module: included
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 260105CH1A, 260105CH1A_2017. Partslink: 260105CH1A.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- LED module included
Installation
- Disconnect the battery. Remove the core support cover, raise the car, remove the center under tray, both front wheels and the front halves of the wheel-well liners.
- Unplug the LED running-light harnesses below each headlight, the parking-sensor/camera connectors in the passenger wheel well and the fog lights from below.
- Remove the 10 mm screw at each inner bumper-to-fender corner, the bolt and retainer plate above each headlight, and the top push pins, then pull the bumper off with a helper (tape the edges).
- Remove the four 10 mm headlight bolts (two top, one side, one bottom), unplug the connectors and lift the lamp out.
- Install the new lamp, reconnect, test all functions, refit the bumper and aim the beams.
Steps compiled from AMS/Alpha Performance Q50/Q60 front bumper removal instructions; PrismBeam Q60 headlight install guide; Infiniti Q60 Forums "Headlight assembly replacement" thread. Professional installation and headlight aiming are recommended.
FAQs
How do I know if my Q60 has AFS?
AFS lamps have three plugs on the back; non-AFS lamps have one. These are for AFS cars only.
Will these fit a 2015 Q60?
No. That is the older G37-based coupe.
Do I need to remove the front bumper to replace these headlights?
Yes. The Q60 front bumper must come off; each lamp is then held by four 10 mm bolts.
Can I install HID or LED kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.