Halogen Headlights Pair for Buick Lucerne (2006-2011)
$247.95
Skip to product information
Halogen Headlights Pair for Buick Lucerne (2006-2011)
$247.95
DS-25974773
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit 2006-2011 Buick Lucerne only. They will not fit other Buick models or years.
Give a 2006-2011 Buick Lucerne a clean factory look again. This original-style halogen pair replaces tired or damaged headlight assemblies on Lucernes from this generation. Each lamp is DOT and SAE compliant, and 9006 halogen bulbs come in the box so you can install a complete pair.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2006-2011 | Buick Lucerne | Entire 2006-2011 generation. |
Specs
- Sold as: driver and passenger pair
- Housing / style: original-style halogen housing, clear lens, amber side reflector
- Lighting: halogen, with 9006 bulbs included
- DOT and SAE compliant
- New aftermarket assemblies, designed to replace the factory halogen units
Bulb size: 9006 (included).
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
- 9006 halogen bulbs
Interchange References
Replaces the original halogen housings used under 25974773 (driver) and 25974774 (passenger), including 25772343 and 25772344, and Partslink GM2502277 / GM2503277.
Installation: Buick Lucerne (2006-2011)
On the 2006-2011 Lucerne, the front bumper fascia is typically removed so you can reach the headlight mounting fasteners. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Support the car safely if you need to turn a wheel for better access. Remove the engine sight shield if it is in the way, then the fascia fasteners along the top edge, at the lower edge, in the wheelhouse liners, and through the wheel openings. Disconnect fog-lamp connectors if the car has them, and release the grille or air deflector as needed so the cover can come forward. Unclip the fascia from the fenders and set it on a soft surface.
- Unplug the factory connectors from the back of the old assembly. Remove the mounting fasteners that hold the headlight to the radiator support and fender, and lift the housing out. Do not pull on the wiring.
- Set the new assembly in the same opening, start the fasteners, and connect the factory-style connectors. Repeat on the other side.
- Reinstall the bumper fascia and any connectors you removed, reconnect the battery, and test low beam, high beam, and the side marker / turn function. Aim the lamps on a level surface before driving at night.
Frequently Asked Questions
Which vehicles do these headlights fit?
2006-2011 Buick Lucerne. Compare your current lamps with our photos before ordering.
Will they fit another Buick, or a Lucerne outside 2006-2011?
No. The Lucerne was built for the 2006-2011 model years, and this pair is for that generation only.
Are these a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Do they include bulbs?
Yes. 9006 halogen bulbs are included for both assemblies.
How are they installed on a 2006-2011 Lucerne?
The front bumper fascia is typically removed to reach the mounting fasteners. Unplug the factory connectors, remove the fasteners, and set the new lamp in the same opening. Reinstall the fascia and aim the lamps before nighttime driving.