Halogen Headlights Pair for Honda CR-V (1997-2001)
$146.95
Skip to product information
Halogen Headlights Pair for Honda CR-V (1997-2001)
$146.95
DS-33151S10A01
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit 1997-2001 Honda CR-V only. They will not fit 2002-up CR-V. H4 halogen bulbs are not included — transfer your existing bulbs or have new H4 bulbs ready.
Give a first-generation CR-V a clean factory look again. This original-style halogen pair replaces tired or damaged headlights on 1997-2001 Honda CR-V with chrome-housing, clear-lens assemblies that use the factory H4 bulb and the factory connector. Each lamp is DOT and SAE compliant. This is a direct-fit pair — no splicing.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1997-2001 | Honda CR-V | First generation only. Will not fit 2002-up CR-V. |
Specs
- Sold as: driver and passenger pair
- Housing / style: original-style chrome housing, clear lens
- Lighting: halogen, H4 bulb type (bulbs not included)
- DOT and SAE compliant
- New aftermarket assemblies, designed to replace the factory halogen units
Bulb size: H4 (not included).
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
Interchange References
Replaces the original halogen housings used under 33151-S10-A01 / 33151S10A01 (driver) and 33101-S10-A01 / 33101S10A01 (passenger), and Partslink HO2502112 / HO2503112.
Installation: Honda CR-V (1997-2001)
On the 1997-2001 CR-V, the headlights typically come out from under the hood. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Open the hood. Remove the 10 mm fasteners along the top of each headlight. If a lower fastener is hidden by the bumper corner, loosen that corner so you can reach it.
- Pull the assembly forward and unplug the factory connector. Do not pull on the wiring. Transfer your existing H4 bulbs into the new housings, or install new H4 bulbs — bulbs are not included with this pair.
- Connect the factory-style connector, seat each assembly, and start the fasteners. Repeat on the other side.
- Reinstall any bumper-corner fasteners, reconnect the battery, and test low beam and high beam. Aim the lamps on a level surface before driving at night.
Frequently Asked Questions
Which vehicles do these headlights fit?
1997-2001 Honda CR-V only. They will not fit 2002-2006 or later CR-V generations, which use different housings. Compare your current lamps with our photos before ordering.
Will they fit a 2002-up CR-V?
No. This pair is the 1997-2001 first-generation housing only.
Are these a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Do they include bulbs?
No. H4 halogen bulbs are not included. Transfer your existing bulbs or have new H4 bulbs ready before you install.
How are they installed on a 1997-2001 CR-V?
On this generation, the assemblies typically come out from under the hood. Remove the 10 mm fasteners along the top of each housing. If a lower fastener is hidden by the bumper corner, loosen that corner first. Unplug the factory connector, transfer your H4 bulbs into the new housings, reconnect, and aim the lamps before nighttime driving.