Halogen Headlights Pair w/ Bulbs for Chevy Silverado 2500HD 3500HD (2015-2019)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed or cracked headlights on your 2015-2019 Chevrolet Silverado 2500HD/3500HD with this brand-new halogen pair, bulbs included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2015-2019 | Chevrolet Silverado 2500HD / 3500HD (halogen) | Factory halogen headlights |
Will NOT fit: Silverado 1500; HID/LED trucks; GMC Sierra.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low beam: H11
- High beam: HB3
- Turn signal: 7443LL
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 84388593, 23172788, 23341233, 23359896, 23389970, 23477066, 84096572, 84228049, 23172789, 23341234, 23359897, 23389971, 23477067, 84096573, 84228050. Partslink: GM2502416, GM2503416.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- H11, HB3 and 7443LL bulbs included
Installation
- Disconnect the battery. Remove the plastic clips holding the radiator shroud and lift it off.
- Remove the 10 mm grille bolts and the upper bumper bolts, then pull the grille/bumper forward enough to reach the headlamp (unplug the fogs if the bumper comes off).
- Remove the two upper and two lower headlamp bolts and pull the lamp straight forward. Unplug it.
- Plug in and bolt in the new lamp, refit the grille, shroud and clips, and aim the headlights.
Steps compiled from Tahoe Yukon Forum and GM-Trucks.com headlight-removal threads, T-Rex K2 grille instructions. Professional installation and headlight aiming are recommended.
FAQs
What bulbs do these headlights use?
Per the listing: H11 low beam, HB3 high beam and 7443LL turn signal, included.
Will these fit a Silverado 1500?
No. Per the item specifics these fit 2500HD/3500HD only.
Do I need to remove the front bumper to replace these headlights?
Usually the grille and upper bumper fasteners have to come off (radiator shroud clips, 10 mm grille bolts and upper bumper bolts), then four headlamp bolts: two on top and two behind the grille.
Can I install HID or LED kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.