HID Projector Headlights Pair w/ LED DRL for Chevy Equinox (2018-2021)
$270.95
Skip to product information
HID Projector Headlights Pair w/ LED DRL for Chevy Equinox (2018-2021)
$270.95
DS-84428286
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed or cracked HID headlights on your 2018-2021 Chevrolet Equinox with this brand-new HID projector pair with LED DRL. Half assembly: reuse your D3S bulbs and ballasts.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2018-2021 | Chevrolet Equinox (factory HID) | Factory HID projector headlights |
Will NOT fit: Halogen Equinox; full-LED Equinox; 2022+ Equinox.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam: D3S HID (not included)
- DRL/side marker: LED
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 84428286, 86541966, 84194564, 84258450, 84753438, 84818200, 84194563, 84428285, 84753437, 84818199, 84258449. Partslink: GM2502470, GM2503470.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Headlight housings only
- Half assembly: HID bulbs, ballasts, and high-voltage wires are NOT included; reuse yours
Installation
- Disconnect the battery. Open the hood, remove the upper radiator close-out panel clips and the fascia screws along the top.
- Remove the front wheel-liner screws and pull the liners back, then remove the lower fascia screws/air-deflector fasteners underneath.
- Release the fascia from the fender guides, pull it forward and unplug the fog/sensor wiring.
- Remove the headlamp bolts, unplug and remove the lamp, install the new one, refit the fascia and aim the headlights.
Steps compiled from GM Parts headlight replacement guide and Equinox Forum 2018+ headlight removal threads. Professional installation and headlight aiming are recommended.
FAQs
What bulbs do these headlights use?
Per the listing: D3S HID low/high beam, not included; bulb, ballast and high-voltage wires must be reused from your car.
Will these fit a halogen Equinox?
No. These are for factory HID headlights only.
Do I need to remove the front bumper to replace these headlights?
Yes. On the 2018-2021 Equinox the front fascia must be removed to reach the lower headlamp bolts.
Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.