HID Xenon Projector Headlights Pair w/ AFS for BMW X3 F25 (2011-2014)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace cracked or hazy xenon headlights on your 2011-2014 X3 with this brand-new HID projector pair with adaptive (AFS) function. Bulbs and ballasts not included; reuse yours.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2011-2014 | BMW X3 F25 with factory xenon AFS headlights | Factory HID headlights |
Will NOT fit: Halogen models; 2015-2017 LCI X3; non-AFS lamps; G01 X3.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam: HID xenon projector (match factory bulb)
- Turn signal: replaceable bulb (match factory)
- Bulbs, ballasts and AFS modules: not included
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 63117277003. Partslink: BM2502171, BM2503171.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
Installation
- Lever out the expanding rivets and remove the hood seal; remove the Torx screws along the top of the bumper and the 8 mm screws to the underbody panel.
- Remove the wheel-arch liners and fender-flare clips, then the two 10 mm bumper-to-fender bolts per side and the two T30 screws behind the kidney grilles.
- Unplug the parking-sensor/fog/washer connectors and lift the bumper off with a helper.
- Remove the upper and lower headlight bolts, pull the lamp forward, unplug it, install the new lamp aligned to its holder, reverse the steps and aim.
Steps compiled from BMW repair instructions "Removing and installing left (Xenon) headlight" (F-series, via Bimmerfest); Bimmerpost F25 X3 headlight replacement thread. Professional installation and headlight aiming are recommended.
FAQs
Are bulbs and ballasts included?
No. Transfer them from your old lamps.
Will these fit a 2015-2017 X3?
No. The LCI uses different lamps.
Do I need to remove the front bumper to replace these headlights?
Yes. The front bumper fascia has to come off to reach the headlamp bolts. Plan on 1-2 hours with a helper.
Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.