GENSSI hero — JDM black clear corner headlights pair Honda CR-V (1997-2001) white background

JDM Black Clear Corner Headlights Pair for Honda CR-V (1997-2001)

$147.95
Skip to product information
GENSSI hero — JDM black clear corner headlights pair Honda CR-V (1997-2001) white background

JDM Black Clear Corner Headlights Pair for Honda CR-V (1997-2001)

$147.95
DS-CRV-HEAD-JDM-BLK-CLEAR-1997-2001

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Swap the dated chrome-and-amber factory face on your first-gen CR-V for a sharp JDM black housing with clear corners that reads modern parked or rolling. GENSSI's vehicle-specific pair bolts to the 1997-2001 Honda CR-V mounts and plugs into the factory H4 harness—no splicing.

Important Fitment Note: These are JDM-style black-housing clear-corner halogen assemblies for 1997-2001 Honda CR-V only. They will not fit 2002-up CR-V. This is a style upgrade vs. the OE chrome/amber look we also carry for this generation. H4 / 1157 / 194 bulbs are not included—reuse your factory bulbs.

Fitment

YEAR MAKE / MODEL FITS
1997-2001 Honda / CR-V Yes

Specs

  • Style: JDM black housing with clear corners — aggressive blackout look vs. factory chrome/amber
  • Lighting: Halogen (H4 high/low, 1157 signal, 194 parking)
  • Bulbs: Not included — reuse factory bulbs
  • Housing: Black; Lens: Clear polycarbonate
  • Sold as: Driver and passenger pair
  • Fit: Direct replacement, plugs into factory connectors

Interchange

33151-S10-A01, 33101-S10-A01, 33151S10A01, 33101S10A01, HO2503112, HO2503122

What's included

  • 1 × driver-side (left) headlight assembly
  • 1 × passenger-side (right) headlight assembly

Installation — Honda CR-V (1997-2001)

  1. Park on level ground, set the parking brake, switch the lights and ignition off, and disconnect the negative battery cable.
  2. Remove the front grille: take out the Phillips screws along the top and the hidden Phillips screws accessed through the grille openings / small covers, then release the grille push pins.
  3. Remove the front bumper cover: take out the lower 10 mm bolts, the Phillips screws at each bumper-to-fender corner, and any remaining clips. Slide the bumper forward and unplug fog lights if equipped.
  4. Support each headlight and remove the 10 mm fasteners (typically two on top, one inboard near the grille area, and one at the lower fender corner). Pull the assembly forward and disconnect the harness plugs by pressing each lock tab.
  5. Transfer your H4 headlight bulb (and the 1157 / 194 sockets) into the new housing. Do not touch halogen glass with bare fingers. Seat the dust boot fully around the H4.
  6. Connect the new lamp, align the locating tabs, and reinstall the 10 mm fasteners snug. Repeat on the opposite side, then refit the bumper cover and grille in reverse order.
  7. Reconnect the battery, test low beam, high beam, parking, and turn signal, then aim the headlights on a level surface before night driving.

Buyer FAQ

Is this the same as the OE chrome CR-V headlights? No. This is the JDM black-housing clear-corner style. We also carry an OE-style chrome pair for 1997-2001 CR-V if you want the factory look.

Do I need to cut or splice wiring? No. Each assembly plugs into the factory connectors on the 1997-2001 CR-V.

Are bulbs included? No. Reuse your H4 high/low, 1157 signal, and 194 parking bulbs from the old housings.

You may also like