JDM Black Clear Corner Projector Headlights Pair for Acura TL (2004-2005)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Cloudy amber-corner TL lamps age the whole nose—JDM black clear-corner projectors give the 3rd-gen a sharper, modern face. GENSSI's 2004-2005 Acura TL pair is built for factory HID and bolts in after bumper removal once you transfer your D2S parts.
Important Fitment Note: These are D2S HID projector housings for 2004-2005 Acura TL only. HID bulbs, ballasts, and igniters are not included—transfer them from your factory lamps. Does not fit 2006-2008 or 2009-2014 TL.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2004-2005 | Acura / TL | Yes |
Specs
- Style: JDM black housing, clear corner, projector low beam
- Bulbs: D2S low (HID) — bulbs and ballasts not included; transfer factory HID parts
- Sold as: Headlight pair with ballast gaskets
- Fit: Direct replacement, plugs into factory connectors
Interchange
33151-SEP-A02, 33151-SEP-A01, 33101-SEP-A02, 33101-SEP-A01, AC2518109, AC2519109
What's included
- 1x Driver headlight
- 1x Passenger headlight
- Ballast gaskets
Installation — Acura TL (2004-2005)
- Park on level ground, set the parking brake, switch lights and ignition off, disconnect the negative battery cable, and wait several minutes before handling HID components.
- Remove the lower corner lamps and radiator grille. Unbolt the front bumper cover (upper bolts, side bolts, and wheel-well screws), then pull the cover forward with a helper and unplug fog lights if equipped.
- Remove the metal bumper reinforcement bar to expose the lower headlight bolts.
- Disconnect the headlight harnesses. Remove the seven 10 mm bolts per assembly (top and lower bracket bolts). On the passenger side, drop the washer reservoir for access to the lower bracket bolts if needed.
- Slide each housing out carefully around the lower brackets. Transfer D2S bulbs, ballasts, igniters, and sockets to the new lamps; install the included ballast gaskets.
- Bolt the new housings in, reconnect harnesses, refit the reinforcement bar and bumper cover, then reconnect the battery.
- Test low beam, high beam, and signals, then have HID beam aim checked before night driving.
Buyer FAQ
Do these include HID bulbs or ballasts? No. Transfer your factory D2S bulbs, ballasts, and igniters. Ballast gaskets are included.
Will these fit a 2006-2008 TL? No. This pair is for the 2004-2005 3rd-gen TL only.
Bumper off to install? Yes. Remove the grille, corner lamps, bumper cover, and reinforcement bar to reach the seven 10 mm bolts per side.