JDM Crystal Glass Lens Headlights Pair for Subaru Impreza GC/GF (1995-2001)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Yellowed GC/GF plastic lamps dull the classic Impreza face—JDM crystal glass lenses restore a sharp clear-night signature. GENSSI's 1995-2001 Subaru Impreza GC/GF pair is a vehicle-specific chrome housing set that bolts in and plugs into the factory H4 harness.
Important Fitment Note: Fits 1995-2001 Subaru Impreza GC/GF platforms. Halogen H4 housings with glass lenses—not LED assemblies.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 1995-2001 | Subaru / Impreza GC/GF | Yes |
Specs
- Style: Chrome housing, JDM crystal clear glass lens
- Bulbs: H4 (9003) — bulbs not included
- Sold as: Headlight pair
- Fit: Direct replacement, plugs into factory connectors
Interchange
84001-FA441, 84001-FA451, SU2502117, SU2503117
What's included
- 1x Driver headlight
- 1x Passenger headlight
Installation — Subaru Impreza GC/GF (1995-2001)
- Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable.
- Remove the radiator grille by releasing the top and bottom clips, then pull the grille forward.
- Disconnect the headlight harness connector on each side. Remove the mounting bolts/nuts retaining each assembly (typically three per side on GC/GF).
- Slide each housing forward off the locating tabs. Compare old and new assemblies side by side before install.
- Seat the new glass-lens housings, reconnect the H4 connectors, and snug the fasteners evenly while checking hood and fender gaps.
- Refit the grille, reconnect the battery, test low / high / parking / signal as equipped, then aim the beams on a level surface.
Buyer FAQ
Are these cheap stick-on covers? No. These are full left and right headlight assemblies with glass lenses for the 1995-2001 Impreza GC/GF—not overlays.
Are bulbs included? No. Housings take H4 (9003) bulbs—reuse your factory bulbs or install new H4s.
Do I splice wiring? No. After grille access, the assemblies bolt in and plug into the factory harness.