LED Headlights Pair for Ford Fusion Halogen (2013-2016)

The 2013-2016 Fusion has a clean, simple front. This LED pair replaces the factory halogen housings with a full LED design — a white DRL, projector high and low beams, and a sharper 6000K cutoff after dark.

Features

• Full LED housings for factory halogen Fusions. High beam, low beam, DRL, and turn signals are built into the pair. Color temperature is 6000K, with a rated draw of 35-70W on a 12V system.
• Built for the 2013-2016 pre-facelift opening. The housing follows the earlier Fusion lamp shape and does not fit the 2017-2020 facelift, or cars that came with factory HID or LED headlights.
• Black housings with clear lenses. The finish is polished and textured, with a clear lens over a black housing.
• Sold as a complete pair. You get both the driver-side and passenger-side assemblies. The pair carries DOT, ISO, and OE certifications as documented for this design. Professional installation is recommended.

Signs It's Time to Upgrade Your Headlights

• The factory halogen headlights have yellowed or dimmed, and the Fusion no longer looks as sharp at night.
• You want a brighter 6000K LED cutoff and a white DRL in the 2013-2016 opening.
• You confirmed your Fusion came with factory halogen lamps, not HID or LED.
• You confirmed your Fusion is 2013-2016, not the 2017 facelift.

Why Drivers Love This LED Pair

• The white DRL gives the 2013-2016 Fusion a cleaner front than the factory halogen housings.
• The pair is shaped for the pre-facelift halogen opening, so it sits flush.
• We ship a matched pair with high beam, low beam, DRL, and turn signals in the housings.
• A 1-year warranty stands behind the pair.

Specifications

• Fitment: 2013-2016 Ford Fusion with factory halogen headlights (does not fit factory HID/LED or 2017-2020 facelift)
• Lighting: Full LED, 6000K
• Functions: DRL, turn signal, high beam, low beam
• Power: 35-70W on a 12V system
• Housing / lens: Black housing, clear lens, polished and textured finish
• Certifications: DOT, ISO, OE as documented for this pair
• Warranty: 1 year
• Sold as: Pair (driver and passenger)

What's in the box

• Driver-side (left) headlight assembly
• Passenger-side (right) headlight assembly

Installation on the 2013-2016 Ford Fusion

The front bumper cover has to come off. Disconnect the battery. Remove the upper radiator-cover pins and the top bumper bolts, then the wheel-well screws and the underside fasteners. Pull the bumper corners off the fender clips, unplug fog lights or sensors if equipped, and lift the cover away. Unbolt each headlight, pull the assembly forward, and unplug the harness. Set the new housings in place, reconnect, and test high beam, low beam, DRL, and turn signals before the bumper goes back on. Refit the bumper and aim the lights. Professional installation is recommended.

FAQ

Will this fit a 2017-2020 Fusion?
No. The 2017 facelift uses a different headlight and front end. This pair is for 2013-2016 Fusion only.

Will this fit a Fusion that came with factory HID or LED headlights?
No. This pair is for 2013-2016 Fusion models that came with factory halogen headlights.

Do I have to remove the bumper?
Yes. The front bumper cover has to come off to reach the headlight bolts on the 2013-2016 Fusion.

What warranty do we include?
These headlights are covered by a 1-year warranty.