LED Headlights Pair for Toyota Camry (2010-2011)

The 2010-2011 Camry facelift already has a wider, more modern face than the earlier XV40. This LED pair fills that opening with a white DRL, an amber sequential turn, and a cleaner 6500K cutoff than aging factory lamps.

Features

• Full LED projector housings with a white DRL. High beam, low beam, DRL, and an amber sequential turn are built into the pair, with a start-up animation as shown in the photos. Color temperature is 6500K on a 12V system.
• Built for the 2010-2011 Camry. On-car fitment is the XV40 facelift. It does not fit 2007-2009 Camry or 2012 and newer Camry.
• Black housings with clear lenses. The pair uses a sealed assembly with DOT, ISO, and SAE certifications as documented for this design.
• Sold as a complete pair. You get both the driver-side and passenger-side assemblies. Professional installation is recommended.

Signs It's Time to Upgrade Your Headlights

• The factory 2010-2011 headlights have yellowed or dimmed, and the front of the Camry no longer looks as sharp as the rest of the car.
• You want a brighter 6500K LED cutoff and a sequential turn in the 2010-2011 facelift opening.
• You confirmed your Camry is 2010-2011, not a 2007-2009 car or a 2012 or newer Camry.
• You want a matched LED pair for the facelift front end.

Why Drivers Love This LED Pair

• The white DRL and sequential turn give the 2010-2011 Camry a cleaner night-drive look than the factory lamps.
• The housing is shaped for the XV40 facelift opening, so the pair sits flush.
• We ship a matched pair with high beam, low beam, DRL, and turn signals in the housings.
• A 1-year warranty stands behind the pair.

Specifications

• Fitment: 2010-2011 Toyota Camry (does not fit 2007-2009 or 2012 and newer)
• Lighting: Full LED, 6500K, sequential turn, start-up animation
• Functions: DRL, amber turn signal, high beam, low beam
• Housing / lens: Black housing, clear lens
• Certifications: DOT, ISO, SAE as documented for this pair
• Warranty: 1 year
• Sold as: Pair (driver and passenger)

What's in the box

• Driver-side (left) headlight assembly
• Passenger-side (right) headlight assembly

Installation on the 2010-2011 Toyota Camry

The front bumper cover has to come off. Disconnect the battery. Remove the upper radiator-cover pins and the top bumper bolts on the 2010-2011 Camry, then the wheel-well screws and the underside fasteners. Pull the bumper corners off the fender clips and lift the cover away. Unbolt each headlight, pull the assembly forward, and unplug the harness. Set the new housings in place, reconnect, and test high beam, low beam, DRL, and turn signals before the bumper goes back on. Refit the bumper and aim the lights. Professional installation is recommended.

FAQ

Will this fit a 2007-2009 Camry?
No. The 2007-2009 Camry uses a different headlight and front end. This pair is for the 2010-2011 facelift only.

Will this fit a 2012 or newer Camry?
No. The 2012 redesign uses a different headlight.

Do I have to remove the bumper?
Yes. The front bumper cover has to come off to reach the headlight bolts on the 2010-2011 Camry.

What warranty do we include?
These headlights are covered by a 1-year warranty.