LED Headlights Pair w/ LED Module & Signature Lighting for Ford Bronco (2021-2023)

Replace damaged headlights on your 2021-2023 Ford Bronco with this brand-new LED pair with module and signature lighting.

Fitment

Will NOT fit: Bronco with base halogen headlights; Bronco Sport.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low/high beam, signature DRL: LED
• LED module included
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: M2DZ13008F, M2DZ13008B, P2DZ13008E, P2DZ-13008-G, M2DZ13008A, P2DZ13008C, P2DZ-13008-H. Partslink: FO2502417, FO2503417.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• LED module included

Installation

1. Remove the nine clips on the grille cover and the four 10 mm grille bolts, unplug the front camera and washer line, and lift the grille out.
2. Remove the fender flares (twist the locking levers) and unclip the lower headlamp surround.
3. Release the headlamp top clip, remove the two 10 mm bolts on top and the 8 mm bolt at the bottom.
4. Pull the lamp forward, unplug it, install the new lamp and reverse; aim the headlights.

Steps compiled from Form Lighting 2021+ Bronco headlight install guide and Quadratec Bronco grille/headlight removal. Professional installation and headlight aiming are recommended.

FAQs

Will these fit a Bronco Sport?
No. Full-size Bronco only.

Will these fit a halogen Bronco?
No. Factory LED models only.

Do I need to remove the front bumper to replace these headlights?
No. Only the grille and fender flares come off; the lamp is held by two 10 mm bolts and one 8 mm bolt.

Can I install HID or LED kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.