License Plate Relocation Bracket Holder Kit for Jeep Wrangler JL 2020-2025

Simple front license plate solution for states requiring front plates—mounts to your bumper's D-ring tow point in minutes, includes LED illumination, and works with virtually any Jeep bumper configuration from 1955 to 2025.

The Front Plate Solution That Actually Works

If you live in a state requiring front license plates, you know the frustration. Jeep's factory front bumpers either have ugly mounting holes that ruin the clean look, or aftermarket bumpers have no provision at all for front plate mounting. Drilling into your new powder-coated bumper? Not happening. Adhesive mounts that fall off on the trail? No thanks. Those cheap universal brackets that wobble and rattle? Hard pass.

This D-ring mount bracket solves the problem elegantly by using your existing bumper tow point—the same D-ring mount you'd use for recovery. Remove one D-ring shackle, slide this CNC-formed steel bracket onto the tow point, thread the D-ring back through, and you're done. The license plate sits cleanly in front of your bumper without drilling, without permanent modifications, and without looking like an afterthought. The included white LED license plate light ensures you're legally compliant even at night. Total installation time? About five minutes with basic hand tools.

Key Features at a Glance

• Universal D-Ring Compatibility: Fits any Jeep with front bumper D-ring/tow points—works with CJ, YJ, TJ, JK, JL, and JT Gladiator models from 1955-2025
• No-Drill Installation: Mounts using existing D-ring tow point—no holes drilled in your bumper, completely reversible modification
• CNC-Formed Steel Construction: Precision-cut and formed from durable steel, not flimsy stamped metal that bends and flexes
• Integrated LED Plate Light: White LED illumination included for legal nighttime compliance in all 50 states
• Black Powder-Coated Finish: Weather-resistant coating protects against rust and corrosion while matching most bumper finishes

How It's Used: Installation & Fitment

Installation is genuinely simple. Unscrew one of your front bumper D-ring shackles (typically 3/4" or 7/8" size), slide the license plate bracket over the tow point stud, thread the D-ring shackle back through the bracket and into the tow point, and tighten it down. The bracket is now secured using the same D-ring you'd use for recovery. Mount your license plate to the bracket using the included stainless hardware, then wire the LED light to a switched power source (many owners tap into parking light or DRL circuits). The whole process takes roughly 5-10 minutes. The bracket positions your plate low and centered, keeping it out of the way of your winch, fairlead, or other front-end accessories.

Product Durability & Material Details

The CNC-formed steel construction means this bracket is precision-cut and bent to exact specifications—not stamped from thin sheet metal like cheaper alternatives. The steel thickness provides rigidity so the plate doesn't flex or vibrate at highway speeds. The black powder-coat finish is applied over clean steel for excellent corrosion resistance, critical for a component that's exposed to road salt, mud, and weather year-round. The LED license plate light uses weatherproof wiring and a sealed housing to handle pressure washing and water crossings without shorting out. The stainless steel mounting hardware won't rust, even after years of exposure to the elements.

Your Benefits at a Glance

• Legal Compliance: Satisfies front plate requirements in the 31 states that mandate them, with proper LED illumination
• Clean Installation: No drilling into expensive aftermarket bumpers—keeps resale value intact
• Universal Fit: Works with virtually any Jeep bumper that has D-ring tow points, from vintage CJs to modern JLs and Gladiators
• Quick Removal: When you're heading off-road where plates might get damaged, unscrew the D-ring and the whole assembly comes off in seconds

Extra Info & Specifications

Fitment:

• 1955-1986 Jeep CJ models (CJ-5, CJ-7, CJ-8 Scrambler) with front D-ring tow points
• 1987-1995 Jeep Wrangler YJ with front D-ring tow points
• 1997-2006 Jeep Wrangler TJ and LJ Unlimited with front D-ring tow points
• 2007-2018 Jeep Wrangler JK and JKU with front D-ring tow points
• 2018-2025 Jeep Wrangler JL and JLU with front D-ring tow points
• 2020-2025 Jeep Gladiator JT with front D-ring tow points
• Compatible with most aftermarket bumpers featuring D-ring tow point mounts

Important Notes:

• Requires front bumper with accessible D-ring/tow point mounting location
• Works with standard 12" x 6" North American license plates
• LED light requires wiring to switched 12V power source (parking lights, DRL, or ignition-switched circuit)
• D-ring shackle must be removed and reinstalled during mounting process

Technical Specifications:

• Material: CNC-formed steel construction
• Finish: Black powder-coat (weather and corrosion resistant)
• License Plate Light: White LED with weatherproof wiring
• Mounting Hardware: Stainless steel bolts and washers included
• Installation: No drilling required, mounts to D-ring tow point
• Installation Time: 5-10 minutes with basic hand tools

Package Includes:

• 1x D-ring mounted license plate bracket (CNC-formed steel)
• 1x White LED license plate illuminating light with wiring
• Stainless steel mounting hardware for license plate attachment
• Installation instructions

Note: D-ring shackle is NOT included (uses your existing front bumper D-ring)