Light Smoke Tail Lights Pair for Dodge Dakota (2005-2011)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
A bright red lens leaves a second-gen Dakota looking plain from behind, and this light smoke pair darkens that corner while the brake still reads through the lens at night. GENSSI's set is a left and right assembly for the 2005-2011 Dakota, not the 1997-2004 lamp, and the factory sockets twist in with no splicing.
Important Fitment Note: 2005-2011 Dakota only. A 1997-2004 Dakota uses a different lamp.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2005-2011 | Dodge / Dakota | Yes |
| 1997-2004 | Dodge / Dakota | No |
Specs
- Style: Black chrome housing with a light smoke lens over two round chambers
- Bulbs: Incandescent. Bulbs and sockets are not in the box. Brake and turn use a red 3157. Reverse uses a clear 3157
- Sold as: Pair — left and right light smoke tail lights. Bulbs and sockets are not included
- Fit: Direct replacement for the 2005-2011 Dodge Dakota. Factory sockets, no splicing
Interchange
55077605AC, 55077605AD, 55077604AC, 55077604AD
What's included
- 1x Driver (left) light smoke tail light
- 1x Passenger (right) light smoke tail light
Installation — Dodge Dakota (2005-2011)
- Lower the tailgate. The tool is a T25 Torx bit.
- Remove the two T25 screws on the inner edge of the lamp, beside the open tailgate.
- Pull the housing straight back. Two locking tabs on the outer edge hold it. Support the lamp. Do not hang it from the wires.
- Twist the brake socket and the reverse socket counterclockwise and pull them out. The sockets and bulbs are not in the box.
- Brake and turn use a red 3157. Reverse uses a clear 3157. Keep the factory bulbs in those sockets.
- Lock the sockets into the matching chambers. Line the outer tabs up and push the lamp in until they seat.
- Reinstall the two T25 screws snug. Check park, brake, both turn signals, and reverse, then repeat on the other side.
Buyer FAQ
Does a 2003 Dakota fit? No. This pair is the 2005-2011 lamp. A 1997-2004 Dakota uses a different housing.
Are the bulbs included? No. Move the factory sockets. Brake and turn use a red 3157. Reverse uses a clear 3157.
Which part numbers does this replace? Left replaces 55077605AC and 55077605AD. Right replaces 55077604AC and 55077604AD.