GENSSI hero — monochrome TRD Pro style black housing clear lens tail lights Toyota Tacoma (2016-2023) white background

Monochrome TRD Pro Style Black Housing Clear Lens Tail Lights for Toyota Tacoma (2016-2023)

$279.95
Skip to product information
GENSSI hero — monochrome TRD Pro style black housing clear lens tail lights Toyota Tacoma (2016-2023) white background

Monochrome TRD Pro Style Black Housing Clear Lens Tail Lights for Toyota Tacoma (2016-2023)

$279.95
DS-TACOMA-TAIL-TRD-PRO-MONOCHROME-BLK-CLR-2016-2023

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

The stock chrome-trimmed tails on a third-gen Tacoma look plain next to a TRD Pro—this monochrome set swaps in a glossy black housing with a clear lens for an aggressive off-road look from behind. GENSSI's Tacoma pair is a vehicle-specific replacement that plugs into the factory connectors with no rewiring and ships with bulbs and sockets.

Important Fitment Note: Fits the 2016-2023 (third-generation) Toyota Tacoma, all trims. The 2024 Tacoma uses a different tail light and is not compatible.

Fitment

YEAR MAKE / MODEL FITS
2016-2023 Toyota / Tacoma (3rd Gen), all models Yes
2024 Toyota / Tacoma No

Specs

  • Style: Glossy black housing, clear lens — monochrome TRD Pro look that replaces the stock chrome inner housing; polycarbonate lens with UV and impact protection
  • Bulbs: Incandescent, bulbs and sockets included — x4 7443 red, x2 921 clear, x6 sockets
  • Sold as: Monochrome black housing clear lens tail light pair (left + right) with bulbs and sockets
  • Fit: Direct-fit monochrome tails for 2016-2023 Toyota Tacoma, all models; DOT / SAE certified

Interchange

81560-04200, 81550-04200, TO2800201, TO2801201

What's included

  • 1x Driver monochrome black housing clear lens tail light
  • 1x Passenger monochrome black housing clear lens tail light
  • x4 7443 red bulbs
  • x2 921 clear bulbs
  • x6 bulb sockets

Installation — Toyota Tacoma (2016-2023)

  1. Lower the tailgate.
  2. On one side, remove the two 10 mm bolts, one at the top of the lamp and one at the bottom.
  3. Pull the lamp straight back toward the tailgate. Two locating clips still hold it after the bolts are out, so the first pull takes a steady tug. Do not pry on the lens.
  4. Press the lock tab on each of the three factory connectors and unplug them. If a white locating insert stays in the bed at the top pin and a black insert stays at the bottom pin, leave those inserts in the bed.
  5. Plug the three connectors into the new lamp. They only fit one way. Feed the harness into the bedside, line the pins up, and push the lamp in until the clips seat. Start the two 10 mm bolts by hand and snug them. Do not overtighten.
  6. Repeat on the other side. Check running lights, brake, both turn signals, and reverse before you raise the tailgate.

Buyer FAQ

Is this a smoked cover or a full tail light? A full replacement tail light. The black inner housing replaces the stock chrome look, and the clear lens gives the monochrome TRD Pro style across the whole lamp—no overlay and no film.

Do I need to wire or splice anything? No. The lamps are built for plug-and-play fitment with the factory connectors and need no re-wiring. Bulbs and six sockets come in the box.

Which Tacomas fit, and what is in the box? The 2016-2023 third-generation Tacoma, all models. You get the driver and passenger lamps, four 7443 red bulbs, two 921 clear bulbs, and six sockets, matching OEM 81560-04200 on the left and 81550-04200 on the right.

You may also like