Red Clear Tail Lights Pair for Toyota Pickup (1989-1995)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
An amber turn section leaves a 1989-1995 Toyota Pickup looking stock on the bed corner, and this red and clear pair keeps the brake red while the turn and reverse read through a clear lens. GENSSI's set is the wider lamp for that Pickup, and the factory plug connects with no splicing.
Important Fitment Note: 1989-1995 Pickup only. This is the wider lamp on the flat bed corner. A 1984-1988 Pickup uses the slimmer lamp that follows the curve in the bed. A Tacoma does not use this lamp.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 1989-1995 | Toyota / Pickup | Yes |
| 1984-1988 | Toyota / Pickup | No |
| 1995-2004 | Toyota / Tacoma | No |
Specs
- Style: Chrome housing with a red brake lens and a clear turn and reverse lens
- Bulbs: Incandescent. Six clear bulbs and two amber bulbs are in the box. Park and brake use a 1157. The turn and reverse each use a 1156
- Sold as: Pair — left and right red and clear tail lights, with six clear bulbs and two amber bulbs
- Fit: 1989-1995 Toyota Pickup, 2WD and 4WD, standard cab and extended cab. Factory plug
Interchange
81560-89166, 81550-89166, TO2800105, TO2801105
What's included
- 1x Driver (left) red and clear tail light
- 1x Passenger (right) red and clear tail light
- 6x Clear bulbs
- 2x Amber bulbs
Installation — Toyota Pickup (1989-1995)
- Confirm the wider lamp on a flat bed corner. A 1984-1988 Pickup uses the slimmer curved lamp. A Tacoma uses a different housing.
- The housing is held by four screws, one at each corner of the back. Use a Phillips screwdriver.
- Remove the four screws. Unplug the connector and pull the lamp off the bedside. Do not hang it from the wires.
- Park and brake use the 1157. The turn uses a 1156, and reverse uses a 1156. Six clear bulbs and two amber bulbs are in the box.
- Seat those bulbs in the sockets on the back of the new housing.
- Plug the connector in, set the lamp on the bed corner, and snug the four screws. Do not overtighten the plastic.
- Check park, brake, both turn signals, and reverse, then repeat on the other side.
Buyer FAQ
Does a 1988 Pickup fit? No. A 1984-1988 Pickup uses the slimmer lamp that follows the curve in the bed. This pair is the wider 1989-1995 lamp.
Does a 1995 Tacoma fit? No. This pair is the Toyota Pickup. A Tacoma uses a different housing.
Which part numbers does this replace? Left replaces 81560-89166. Right replaces 81550-89166.