GENSSI hero — red smoke tail lights pair for Ford Ranger (1993-1997) on white

Red Smoke Tail Lights Pair for Ford Ranger (1993-1997)

$99.95
Skip to product information
GENSSI hero — red smoke tail lights pair for Ford Ranger (1993-1997) on white

Red Smoke Tail Lights Pair for Ford Ranger (1993-1997)

$99.95
DS-RANGER-TAIL-RED-SMOKE-PAIR-1993-1997

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

A faded red lens leaves a 1990s Ranger looking dated from behind, and this red smoke pair darkens the lamp by day while the amber turn section still reads clearly when the signal flashes. GENSSI's set is a left and right assembly for the 1993-1997 Ranger, not a lens cover, and the factory sockets twist in with no splicing.

Important Fitment Note: 1993-1997 Ranger only. The 1998-2011 Ranger uses a different tail lamp.

Fitment

YEAR MAKE / MODEL FITS
1993-1997 Ford / Ranger, all trims Yes
1998-2011 Ford / Ranger No

Specs

  • Style: Black housing with a red smoke lens and an amber turn section
  • Bulbs: Incandescent. Bulbs and sockets are not in the box. Each side uses two 3157 bulbs for brake, park, and turn, and one 3156 for reverse
  • Sold as: Pair — left and right tail light assemblies. Bulbs and sockets are not included
  • Fit: Direct replacement for every 1993-1997 Ford Ranger, including XL, XLT, STX, and Splash. Factory sockets, no splicing

Interchange

F37Z-13405-A, F37Z-13404-A, FO2800110, FO2801110

What's included

  • 1x Driver (left) red smoke tail light
  • 1x Passenger (right) red smoke tail light

Installation — Ford Ranger (1993-1997)

  1. Lower the tailgate. The only tool is a Phillips screwdriver.
  2. Remove the two longer Phillips screws on the outboard face of the lamp, then the two shorter Phillips screws on the inner edge beside the tailgate.
  3. Pull the housing straight back. It is located by pins, so support it and do not hang it from the wires.
  4. Twist the three sockets a quarter turn counterclockwise. One is brake and park, one is the turn signal, and one is reverse. The sockets are not in the box.
  5. Lock those sockets into the new housing. The brake and turn sockets take 3157 bulbs. The reverse socket takes a 3156.
  6. Seat the housing, start the two inner screws by hand, then the two outer screws. Snug them. Do not overtighten or the lens can crack.
  7. Check park, brake, both turn signals, and reverse before you raise the tailgate. Repeat on the other side.

Buyer FAQ

Is this a smoke film? No. These are full left and right housings with a red smoke lens and an amber turn section.

Do I have to splice wires? No. The factory sockets twist into the new housings. Bulbs are not in the box.

Which Rangers fit? Every 1993-1997 Ranger, including Splash, XL, XLT, and STX. Left replaces F37Z-13405-A. Right replaces F37Z-13404-A. A 1998-2011 Ranger uses a different lamp.

You may also like