Refurbished LED Headlight Control Module JX7B-13B626-BH for Ford F-150, F-250, F-350, F-450 Super Duty (2020-2023)

Refurbished LED headlight control module, part number JX7B-13B626-BH, for 2020-2023 Ford F-150, F-250 and F-350 Super Duty and 2023 F-450 Super Duty with factory LED headlights. For Ford. Refurbished condition: this is a previously installed module, not a new part. It may show light cosmetic scratches that do not affect function. Free shipping to the lower 48.

Fix a Dark or Flickering LED Headlight

This module drives the LED light sources inside the headlamp. When it fails the headlight can go dark or flicker and a lighting fault can appear. A refurbished module costs far less than a new module or a complete LED headlamp.

Fits

Fits vehicles with the factory LED headlamp. Match the part number on your old module before ordering.

OEM / Interchange Part Numbers

• Ford JX7B-13B626-BH
• JX7B13B626BH

Common Signs of a Failed Module

• One LED headlight goes dark while the other works
• LED headlight flickers or cuts out
• Headlight or lighting fault message on the dash
• Daytime running light or low beam section stops working

Specs

• Condition: Refurbished (previously installed, not new)
• Brand: for Ford
• Lighting technology: LED
• Function: LED headlight control module
• Placement: front headlight
• Mounting: screw-on
• Sold as one unit

What's Included

• 1 x refurbished LED headlight control module JX7B-13B626-BH

Installation

1. Switch the lights and ignition off and disconnect the negative battery cable.
2. On the Ford F-150 or Super Duty the LED control module is mounted to the back or bottom of the headlamp housing. On most models the headlamp has to be unbolted and pulled forward (bumper cover loosened) to reach it.
3. Unplug the module connector, remove the screws holding it and take the old module off.
4. Compare the part number on your old module to the numbers above before fitting this one.
5. Fit the replacement module, refit its screws and lock the connector fully. Reinstall the headlamp and trim and reconnect the battery.
6. Turn the lights on and test low beam, high beam and the other LED functions. If a lighting fault stays on, the module may need to be set up with a Ford-capable diagnostic tool, so plan for a dealer or specialist shop visit if needed.

FAQ

Is this module new?
No. It is a refurbished, previously installed JX7B-13B626-BH module. It may have light cosmetic scratches that do not affect function.

How do I know it fits my truck?
Match the part number printed on your old module. It must read JX7B-13B626-BH; other numbers are not compatible.

Is shipping free?
Yes, shipping is free to the lower 48 US states.