Smiley glass projector headlight pair for the BMW E34 and E32

Smiley Glass Projector Headlights for BMW E34 and E32 (1988-1996)

$293.95
Skip to product information
Smiley glass projector headlight pair for the BMW E34 and E32

Smiley Glass Projector Headlights for BMW E34 and E32 (1988-1996)

$293.95
DS-E34-E32-HEAD-SMILEY-GLASS-PAIR-1988-1996

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

An E34 or E32 picks up the glass ellipsoid projectors in place of the flat US buckets. GENSSI supplies the pair and the 9006 adapters for the 5 Series and 7 Series brackets.

Important Fitment Note: These fit the 1989-1996 E34 and the 1988-1994 E32. They do not fit an E30. The E34 and E32 lamps use two upper brackets. An earlier car that still has sealed-beam buckets needs the 9006 adapters in the box, because those plugs do not match an H1 lamp.

Fitment

YEAR MAKE / MODEL FITS
1989-1996 BMW 5 Series E34 Yes
1988-1994 BMW 7 Series E32 Yes
1984-1991 BMW 3 Series E30 No

Specs

  • Style: Chrome glass ellipsoid projectors on the E34 and E32 brackets
  • Bulbs: H1 low beam, H1 high beam, and W5W city light. None are in the box. Four 9006 adapters are included
  • Sold as: Pair for the E34 and E32, with four 9006 adapters. Bulbs transfer
  • Fit: 1989-1996 E34 and 1988-1994 E32. The E30 bracket is different. Sealed-beam cars need the adapters

Interchange

63121379185, 63121379186, BM2502106, BM2503106

What's included

  • 1x Driver headlight
  • 1x Passenger headlight
  • 4x 9006 adapters

Installation — 1988-1996 BMW E34 and E32

  1. Open the hood and disconnect the battery ground.
  2. On the left lamp, unclip the air duct that runs to the alternator before the cover will turn.
  3. Turn the rear cover locks 90 degrees and take the cover off.
  4. Remove the three screws that hold the lamp and its bracket, unplug the connectors, and pull the assembly out.
  5. On a sealed-beam car, plug the 9006 adapters in the box onto the factory high and low leads. An ellipsoid car uses the H1 plugs already.
  6. Set the new lamps on the brackets, tighten the three screws, refit the covers, reconnect the battery, and aim the beams.

Buyer FAQ

Will these fit an E30? No. The E30 lamp has one upper bracket. This pair has the two-bracket E34 and E32 frame.

Do the E34 and E32 share this pair? Yes. The ellipsoid lamps and the brackets are the same on the 1989-1996 E34 and the 1988-1994 E32.

Are the H1 bulbs included? No. Low beam, high beam, and the city light move over. The box has four 9006 adapters for a sealed-beam car.

You may also like