Smoke amber LED corner lights with a chrome housing for a BMW E46 sedan

Smoke Amber LED Corner Lights for BMW E46 Sedan (1999-2001)

$139.95
Skip to product information
Smoke amber LED corner lights with a chrome housing for a BMW E46 sedan

Smoke Amber LED Corner Lights for BMW E46 Sedan (1999-2001)

$139.95
DS-E46-CORNER-SMOKE-AMBER-LED-1999-2001

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

The amber E46 sedan corner goes to a molded smoke lens in a chrome housing and still flashes amber from the built-in LEDs. GENSSI supplies both clip-on corners, sockets, and load resistors for the 1999-2001 sedan and wagon.

Important Fitment Note: Clip-on tabs only, for the 1999-2001 sedan and wagon, in a chrome housing. The black housing smoke LED pair is a separate product. The screw-on corner and the coupe corner are different parts. Two sockets and two load resistors are in the box. Bolt each resistor to bare metal. It gets hot while the lamp is on.

Fitment

YEAR MAKE / MODEL FITS
1999-2001 BMW E46 sedan and wagon Yes
1999-2001 BMW E46 coupe and convertible No
2002-2005 BMW E46 sedan and wagon No

Specs

  • Style: Smoke lens clip-on corner in a chrome housing, with built-in amber LEDs. The smoke is molded
  • Bulbs: None. Amber LEDs are built in. Two sockets and two load resistors are in the box
  • Sold as: Pair of chrome housing smoke amber LED clip-on corners with sockets and load resistors
  • Fit: 1999-2001 BMW E46 sedan and wagon with the clip-on corner. Not the screw-on corner and not the coupe. Not the black housing pair

Interchange

63138370585, 63136902765, 63138370586, 63136902766

What's included

  • 1x Driver corner light
  • 1x Passenger corner light
  • 2x Sockets
  • 2x Load resistors

Installation — 1999-2001 BMW E46 Sedan

  1. Open the hood. On this sedan the retainer sits in the bore above the corner.
  2. Press that retainer down and slide the lamp forward. If the hole has a Phillips screw instead, this is the later corner and this pair does not fit.
  3. Unplug the old socket. The new corner has its own socket and built-in amber LEDs.
  4. Bolt the load resistor to bare metal, away from the bumper cover. The resistor gets hot while the lamp is on.
  5. Set the rubber seal on the trim, hook the clip-on tabs, and slide the lamp back until it locks.
  6. Plug the socket in, check the turn signal, and do the other side.

Buyer FAQ

Is this the black housing pair? No. This pair is the chrome housing. The black housing smoke LED pair is a separate product.

Does a 2003 sedan use this pair? No. The 2002-2005 sedan uses the screw-on corner. This pair is the 1999-2001 clip-on lamp.

Is the light amber? Yes. The lens is smoke, the housing is chrome, and the LEDs are amber.

You may also like