Smoke Halogen Tail Lights Pair for Ford Super Duty F-250 F-350 F-450 F-550 (2008-2016)
$99.95
Skip to product information
Smoke Halogen Tail Lights Pair for Ford Super Duty F-250 F-350 F-450 F-550 (2008-2016)
$99.95
DS-BC3Z13405A
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These tail lights fit Ford Super Duty F-250, F-350, F-450, and F-550 (2008-2016) only. They will not fit 2017-up Super Duty, 1999-2007 Super Duty, or F-150. Compare your current housings with our photos before ordering.
Give a 2008-2016 Super Duty a smoked factory-style look with this halogen tail light pair. You get driver and passenger assemblies in a chrome housing, with a smoked red lens and a clear reverse section at the top. Reuse your existing halogen bulbs — bulbs are not included. The housings use the factory mounting points and factory-style connectors.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2008-2016 | Ford F-250 Super Duty | Smoke halogen housing |
| 2008-2016 | Ford F-350 Super Duty | Same housing |
| 2008-2016 | Ford F-450 Super Duty | Same housing |
| 2008-2016 | Ford F-550 Super Duty | Same housing |
Specs
- Sold as: a driver and passenger pair
- Style: chrome housing, smoke lens
- Lighting: halogen tail, brake, turn, and reverse; bulbs not included
- 12 V
- New aftermarket assemblies
- OEM cross-reference: BC3Z13405A, BC3Z13404A, 7C3Z13405A, 7C3Z13404A, FO2800208, FO2801208
What’s in the box
- Driver tail light assembly
- Passenger tail light assembly
Installation
- Open the tailgate so you can reach the bolts behind each bedside lamp.
- Remove the two bolts that hold the assembly to the bedside.
- Pull the housing straight back off the bed, then unplug the factory connector and twist out the bulb sockets.
- Transfer the bulbs and sockets into the new housing, seat it on the factory mounting points, reconnect, and tighten the bolts.
- Repeat on the other side, then check tail, brake, turn, and reverse functions before closing the tailgate.
A do-it-yourself installer can usually finish both sides in about 30-45 minutes with basic hand tools. Always disconnect the negative battery cable before you start and torque fasteners to the factory specification.