Smoked LED Headlights Pair for Lexus GS300 / GS350 / GS430 / GS460 / GS450h (2006-2011)

These smoked full-LED headlights update a 2006-2011 GS with a darker lens, a white DRL, projector high and low beams, sequential turn signals, and a start-up animation. They are built for GS300, GS350, GS430, GS460, and GS450h models from those years, including cars that left the factory with HID and AFS — provided AFS is turned off as described above.

Features

• Full LED lighting. High beam (70W), low beam (45W), DRL, turn signal, and side marker functions are built in, at 6500K on a 12V system.
• Start-up animation and sequential turn signals. The running lights play a start-up animation, and the turn signals sweep in sequence.
• Smoked / tinted lenses on black housings. A polished, smooth smoked lens over a black housing — a darker look than the factory clear HID lamps.
• Sealed construction. The housings are sealed and rated IP67, with DOT, ISO, and SAE certifications as documented for this pair.
• Complete pair. Driver and passenger assemblies, with the LED modules included. Professional installation is recommended.

Signs It's Time to Upgrade Your Headlights

• The original HID housings have hazed, and the chrome inside no longer looks as sharp as the rest of the GS.
• You want smoked lenses and a modern LED DRL instead of the factory clear projector face.
• You like a start-up animation and sequential turns — details these housings add that stock lamps do not.
• You're replacing a tired or leaking assembly and want a matched left-and-right pair.

Why Drivers Love This Smoked LED Pair

• The tinted lens and black housing give the 3rd-generation GS a cleaner, more aggressive front end.
• Start-up animation and sequential turns add motion the factory HID lamps never had.
• High and low LED beams, DRL, turn, and side marker lighting are all in the housing.
• The pair is made to work on factory HID/AFS cars once AFS is switched off as described in the fitment warning.

Specifications

• Lighting technology: LED (full LED, modules included)
• Functions: High beam, low beam, DRL, turn signal, side light
• Color temperature: 6500K
• Wattage: 45W low beam, 70W high beam
• Voltage: 12V
• Housing / lens: Black housing, smoked / tinted lens, polished smooth finish
• Water resistance: IP67
• Certifications: DOT, ISO, and SAE as documented
• Warranty: 1 year
• Sold as: Pair (driver and passenger)
• Fitment: 2006-2011 Lexus GS300, GS350, GS430, GS460, and GS450h. Factory HID/AFS cars require AFS to be turned off.

What's in the box

• 1 x driver-side (left) LED headlight assembly
• 1 x passenger-side (right) LED headlight assembly

Installation on the 2006-2011 Lexus GS

On the 2006-2011 GS (GS300, GS350, GS430, GS460, and GS450h), the front bumper cover is removed to take the headlights out. Disconnect the negative battery terminal first. Remove the under-hood clips and intake-duct cover, then the bumper clips, screws, and bolts. Ease the cover off the fender claws and disconnect the parking-sensor connector if the car has it.

Each headlight is held by three bolts. Disconnect the main harness (and the headlight-washer hose if equipped), release the retaining claw, and pull the assembly forward. If the car has factory AFS, turn AFS off before you finish the install: either pull the AFS fuse (H-LP LVL, 7.5A) in the driver-side instrument panel, which also disables auto-leveling, or unplug the gray AFS control box on the lower left side of the steering wheel. High/low beam function may also be affected when AFS is cancelled.

Set the new lamps, reconnect the harnesses, and refit the bumper with an extra set of hands — the lower edge tucks around the headlight openings. Confirm every function, then aim the lamps on level ground. Professional installation is recommended.

FAQ

What does this pair fit?
2006-2011 Lexus GS300, GS350, GS430, GS460, and GS450h. It is compatible with factory HID/AFS headlights if AFS is turned off as described in the fitment warning.

Does it fit a 2012 GS?
No. These housings are for the 2006-2011 GS only. The 2012 GS is a different generation.

Do I have to remove the bumper?
Yes. The factory procedure removes the front bumper cover so you can reach the three headlight bolts and the harness.

What if my GS has AFS?
AFS must be turned off during installation, either by removing the AFS fuse or unplugging the AFS control box. That also disables auto-leveling, and high/low beam function may be affected.

What warranty do we include?
These headlights are covered by a 1-year warranty.