Tail Lights Pair for Ford Maverick XL / XLT (2022-2027)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace a cracked, hazy or damaged tail light on your 2022-2027 Maverick and the rear goes back to the clean red-and-clear look it shipped with. GENSSI supplies this vehicle-specific left-and-right pair for XL and XLT trucks, not a universal cover or fit-most part.
Important Fitment Note: This pair fits the Maverick XL and XLT only. It does not fit any other trim, including the Lariat, Lobo and Tremor.
Fitment
| YEAR | MAKE / MODEL | SUBMODEL / BED | FITS |
|---|---|---|---|
| 2022-2027 | Ford Maverick | XL, XLT | Yes |
| 2022-2027 | Ford Maverick | Lariat, Lobo, Tremor | No |
Specs
- Type: Tail light assemblies, left & right
- Lens color: Red & clear
- Placement: Rear, driver & passenger side
- Sold as: Pair (2 pieces)
- Fitment type: Direct replacement
- Construction: Sealed assembly, screw mounting, wire connection
Interchange
NZ6Z13405C, NZ6Z13404C, NZ6Z13405A, NZ6Z13405E, NZ6Z13404D, FO2800288, FO2801288
What's included
- 1 x pair tail light assemblies (driver side & passenger side)
Installation — Ford Maverick (2022-2027)
- Open the tailgate. If equipped with a tailgate assist strut that blocks the bolts, release the strut clip and move the strut aside.
- Remove the two 8 mm bolts on the inner edge of each tail lamp.
- Pull the lamp outward at roughly a 45° angle to release the angled retaining pins / ball studs. Press the harness lock tab and unplug the connector.
- Plug in the new lamp, align the guide pins, and seat it flush into the bed opening. Reinstall the two 8 mm bolts snug — do not overtighten or the housing can pull out of the grommets.
- Repeat on the other side, reattach any assist strut, and test running, brake, turn, and reverse lights.
Buyer FAQ
Which Maverick trims does this pair fit? The 2022-2027 Maverick XL and XLT. It does not fit the Lariat, Lobo or Tremor.
Is this a complete tail light or just a lens? It is a complete tail light assembly for each side, a full replacement for the factory unit, not a lens or cover.
What is in the box, and what does it interchange with? One left and one right assembly. Interchanges with OEM NZ6Z13405C, NZ6Z13404C, NZ6Z13405A, NZ6Z13405E and NZ6Z13404D, plus Partslink FO2800288 and FO2801288.