Illuminate Your Adventures: XDR LED Chrome Headlights with DRL
Transform your classic Jeep XJ or YJ from a nostalgic ride into a modern powerhouse. These XDR Chrome LED Headlights with integrated Daytime Running Lights (DRL) don’t just upgrade your Jeep’s appearance; they fundamentally enhance your driving experience, offering superior visibility and a distinct, commanding presence on the road and trail.
Why You Need This
-
Unmatched Visibility: Projector-style lenses with a sharp cutoff line direct light precisely where you need it, significantly reducing glare for oncoming drivers while maximizing illumination on the road ahead.
-
Brilliant Illumination: Experience dramatically brighter low and high beams compared to stock halogen headlights, with a crisp white light that makes road markings and signs pop, even in challenging conditions.
-
Modern DRL Functionality: The integrated center LED strip serves as a stylish Daytime Running Light, increasing your vehicle’s visibility to others during daylight hours and adding a unique, high-tech aesthetic.
-
Plug-and-Play Installation: Designed as a direct replacement for your factory headlights, these XDR LEDs utilize the standard H4 connection, ensuring a straightforward, hassle-free upgrade.
Technical Specifications
| Part Numbers |
XDR9-7X6-DRL |
| Fitment |
- Jeep Cherokee XJ: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
- Jeep Wrangler YJ: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
|
| Specifications |
- Housing: Aluminum Alloy for effective heat dissipation
- Low Beam Power: 35W <3000 Lumens
- High Beam Power: 85W <5500 Lumens
- Lifespan: Up to 30,000 hours
- Connection: H4 plug
- DRL Wiring: Requires connection to a 12V power source (e.g., ignition switch, park lamp, or turn signal wire)
|
At GENSSI, we are committed to providing automotive enthusiasts with the highest quality lighting solutions. Experience the GENSSI Promise: exceptional performance, cutting-edge technology, and a commitment to improving your driving experience.
Installation
- Park on level ground, turn the engine off, and disconnect the negative battery cable.
- Remove the grille or headlight bezel/trim ring screws (varies by Jeep model) to access the headlight.
- Remove the retaining ring screws, pull the old headlight forward, and unplug it from the harness.
- Plug in the new LED headlight (use the included adapter if one is supplied for your model) and test high/low beam before fully mounting.
- Mount the new headlight with the retaining ring, then reinstall the bezel or grille.
- Reconnect the battery, check all functions (high, low, DRL/halo if equipped), and aim the headlights on a flat wall before night driving.
Some vehicles may need anti-flicker or CANbus decoders to prevent flicker or dash warnings. Professional installation is recommended if you are unsure.
