Xenon Headlight Driver Module 63117316214 for BMW X3 F25 (2011-2014)

New xenon headlight driver module (control unit), a replacement for BMW 63117316214, for 2011-2014 BMW X3 F25 with factory xenon headlights. Not for adaptive (AFS) headlights. Replacement unit for BMW, not a Genuine BMW part. Free shipping to the lower 48.

Fix a Dark or Flickering Xenon Headlight

This module sits on the headlamp and controls the xenon headlight functions. When it fails the headlight can go out or flicker and a lighting fault can appear. Replacing just the module costs far less than a complete headlamp.

Fits

Fits vehicles with the factory Xenon headlamp. Match the part number on your old module before ordering.

OEM / Interchange Part Numbers

• BMW 63117316214 / 7316214
• 63117297431 / 7297431
• 63117305232 / 7305232
• 63117316185 / 7316185
• 1307329333 / 711307329333
• LRA940

Common Signs of a Failed Module

• Headlight goes out or flickers
• Headlight or lighting fault message on the dash
• One headlight dead while the bulb is good
• Headlight functions work intermittently

Specs

• Brand: replacement for BMW (not Genuine OEM)
• Lighting technology: Xenon headlight
• Function: headlight driver module (control unit)
• Not suitable for adaptive headlights
• Placement: front left or right headlight
• Sold as one unit, new
• Warranty: 1 year

What's Included

• 1 x headlight driver module 63117316214 (replacement)

Installation

1. Switch the lights and ignition off and disconnect the negative battery cable.
2. On the BMW X3 F25 the driver module is mounted to the back or bottom of the headlamp housing. On most models the headlamp has to be unbolted and pulled forward (bumper cover loosened) to reach it.
3. Unplug the module connector, remove the screws holding it and take the old module off.
4. Compare the part number on your old module to the numbers above before fitting the new one.
5. Fit the new module, refit its screws and lock the connector fully. Reinstall the headlamp and trim and reconnect the battery.
6. Then test the headlight. On many BMW models a replacement headlight module must be initialized / coded to the vehicle with BMW ISTA or equivalent, so plan for a dealer or specialist shop visit if a fault remains after install.

FAQ

Is this a Genuine BMW part?
No. It is a new replacement built to fit in place of BMW 63117316214 and the interchange numbers listed above.

Does it fit adaptive headlights?
No. It is for X3 F25 xenon headlights without the adaptive (AFS) function. Match the part number on your old module.

Is shipping free?
Yes, shipping is free to the lower 48 US states.