Xenon Headlights Pair w/o AFS for BMW X3 F25 & X4 F26 (2015-2018)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace damaged headlights on your facelifted BMW X3 (F25) or X4 (F26) with factory xenon and no adaptive (AFS) lighting with this new pair. Reuse your factory bulbs and ballasts.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2015-2018 | 2015-2017 BMW X3 and 2015-2018 X4 with factory xenon, WITHOUT AFS | Factory xenon headlights without AFS |
Will NOT fit: Halogen, AFS/adaptive or LED-headlight cars; 2011-2014 X3.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low beam: Xenon, match your factory bulbs (reuse them)
- AFS: No
- Housing: Black
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 63117401135. Partslink: BM2518143, BM2519143.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
- HID bulbs and ballasts are NOT included; reuse your factory ones
Installation
- Lever out the expanding rivets and remove the hood seal; remove the Torx screws along the top of the bumper and the 8 mm screws to the underbody panel.
- Remove the wheel-arch liners and fender-flare clips, then the two 10 mm bumper-to-fender bolts per side and the two T30 screws behind the kidney grilles.
- Unplug the parking-sensor/fog/washer connectors and lift the bumper off with a helper.
- Remove the upper and lower headlight bolts, pull the lamp forward, unplug it, install the new lamp aligned to its holder, reverse the steps and aim.
Steps compiled from BMW repair instructions "Removing and installing left (Xenon) headlight" (F-series, via Bimmerfest); Bimmerpost F25 X3 headlight replacement thread. Professional installation and headlight aiming are recommended.
FAQs
Will these fit a car with adaptive (AFS) headlights?
No, per the listing. Match the connector shown in the photos.
Does it fit the 2011-2014 X3?
No. See our pre-facelift version.
Do I need to remove the front bumper to replace these headlights?
Yes. BMW's procedure removes the front bumper to reach the headlight bolts.
Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.