Xenon HID ballast 63126948180 W3T13271 for BMW E90 E91

Xenon HID Ballast 63126948180 for BMW 3 Series E90 E91 (2006-2008)

$73.95
Skip to product information
Xenon HID ballast 63126948180 W3T13271 for BMW E90 E91

Xenon HID Ballast 63126948180 for BMW 3 Series E90 E91 (2006-2008)

$73.95
DS-63126948180

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Replacement D1S/D1R xenon HID ballast for BMW, interchange 63126948180 / Mitsubishi W3T13271, for 2006-2008 BMW 3 Series E90 sedan and E91 wagon with factory xenon headlights. Aftermarket replacement, not a Genuine BMW part. Free shipping to the lower 48.

Fix a Flickering or Dead Xenon Headlight

A failing ballast is one of the most common E90 headlight faults. The xenon light flickers, turns pink, drops out after a few minutes or stays off, often with a light-failure warning. Replacing the ballast is far cheaper than a new headlight.

Fits

Year Make Model
2006 BMW 325i
2007-2008 BMW 328i
2007-2008 BMW 328xi
2006 BMW 330i
2006 BMW 330xi
2007-2008 BMW 335i
2007-2008 BMW 335xi

Fits vehicles with factory xenon HID headlights. Match the part number on your old ballast before ordering.

OEM / Interchange Part Numbers

  • 63126948180
  • 63 12 6 948 180
  • 6948180
  • W3T13271

Common Signs of a Failed Ballast

  • Headlight flickers or cuts out
  • Light shuts off after warming up
  • One headlight dark while the bulb tests good
  • Headlight or lamp-out warning on the dash

Specs

  • Bulb type: D1S / D1R xenon
  • Placement: front, left or right
  • Condition: new, sold as one unit

What's Included

  • 1 x xenon HID ballast, interchange 63126948180 / W3T13271

Installation

  1. Switch the lights off, remove the key and disconnect the negative battery cable. Let the bulb cool.
  2. The ballast is bolted to the bottom of the headlight housing. On the E90/E91, the headlight usually has to come out, and depending on access the front bumper cover may need to be removed first.
  3. Remove the headlight mounting bolts, unplug the harness and lift the headlight out.
  4. Remove the Torx screws holding the ballast to the housing, unplug it and remove the old unit.
  5. Check the old ballast reads W3T13271 or 63126948180, fit the new unit and tighten the screws evenly so the seal stays tight.
  6. Refit the headlight, reconnect the battery and check for a light warning in the cluster.
  7. If the light still flickers, replace the D1S bulb, since a worn bulb can stress a new ballast.

Xenon systems carry high voltage. Never work on the ballast with the lights on.

FAQ

Is this a Genuine BMW part?
No. It is a new replacement ballast made for BMW, built to interchange with 63126948180 / W3T13271.

Does it fit my 2009 or later 3 Series?
We only list 2006-2008 E90/E91 cars because that is the fitment we could confirm. Match the number on your old ballast before ordering.

Is shipping free?
Yes, shipping is free to the lower 48 US states.

You may also like