XPE Honeycomb Chrome Projector Headlights with day time running lights option for
- Jeep Cherokee XJ 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
- Jeep Wrangler YJ 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Direct Replacement and upgrade for your factory headlights, these headlights are plug & play the headlights use the H4 connection. Replace those dull halogen sealed beam headlamps with the latest in LED technology. Not only will these update the look of your XJ or YJ, but you will see much better! Unique Honey-Comb design will also add a twist to your front end!
Features and Benefits of the Jeep Federation XPE Honeycomb LED Chrome Projector Headlights
- Direct replacement headlights for XJ or YJ Jeeps
- Sharper Vision - Because of the projector glass, the glare to other drivers will be much reduced; The straight cut-off-line will put the light where you want it to be and not in people’s eyes
- More light on the road both in low beam and high beam
- More white light that reflects better on the road white markings and signs
- DRL Function - The DRL function includes two strips on the side that light up - wiring required
- Long life - up to 30,000 hours of use
Specifications
- 35W Low beam <3000 Lumens
- 85W High beam <5500 Lumens
- Aluminum Alloy Housing is designed to spread the heat effectively
- DRL function must be wired to 12V power source to turn on; this can be a switch or existing wire such as turn signal or park lamp light
Installation
- Park on level ground, turn the engine off, and disconnect the negative battery cable.
- Remove the grille or headlight bezel/trim ring screws (varies by Jeep model) to access the headlight.
- Remove the retaining ring screws, pull the old headlight forward, and unplug it from the harness.
- Plug in the new LED headlight (use the included adapter if one is supplied for your model) and test high/low beam before fully mounting.
- Mount the new headlight with the retaining ring, then reinstall the bezel or grille.
- Reconnect the battery, check all functions (high, low, DRL/halo if equipped), and aim the headlights on a flat wall before night driving.
Some vehicles may need anti-flicker or CANbus decoders to prevent flicker or dash warnings. Professional installation is recommended if you are unsure.
