GENSSI hero — all clear chrome Z-shape red LED tail lights Nissan 350Z (2003-2005) white background

All Clear Chrome Z-Shape Red LED Tail Lights Pair for Nissan 350Z (2003-2005)

$335.95
Ir directamente a la información del producto
GENSSI hero — all clear chrome Z-shape red LED tail lights Nissan 350Z (2003-2005) white background

All Clear Chrome Z-Shape Red LED Tail Lights Pair for Nissan 350Z (2003-2005)

$335.95
DS-350Z-Z33-TAIL-ALL-CLR-CHROME-Z-RED-LED-2003-2005

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Stock 03-05 350Z tails are a plain red—this all-clear chrome Z-shape set swaps in a bright red LED Z signature behind a crystal clear lens. GENSSI's 350Z kit is a vehicle-specific tail light pair that bolts into the Z33 openings and plugs into the factory harness.

Important Fitment Note: Fits 2003-2005 350Z (Z33) models with factory halogen-style tail lights—not 2006-2009 350Z with factory LED tail lights.

Fitment

YEAR MAKE / MODEL FITS
2003-2005 Nissan / 350Z Z33 (all models / trims) Yes

Specs

  • Style: Chrome housing, all-clear lens with Z-shape red LED array
  • Bulbs: Red LED Z array for brake / parking — reuse factory sockets; x2 194 red bulbs for the parking positions are not included
  • Sold as: All-clear chrome Z-shape red LED tail light pair
  • Fit: Direct-fit all-clear Z-shape LED tails for 2003-2005 Nissan 350Z Z33, all models and trims

Interchange

26555-CF40A, 26550-CF40A

What's included

  • 1x Driver all-clear Z-shape red LED tail light
  • 1x Passenger all-clear Z-shape red LED tail light
  • x6 hardware covers

Installation — Nissan 350Z Z33 (2003-2005)

  1. Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable.
  2. Open the rear hatch (coupe) or trunk lid (roadster). Pull back the liner access panel behind each tail light, then pop off the three plastic bolt covers on top of the lamp with a flat screwdriver.
  3. Remove the three 10 mm bolts from each lamp. Slide the lamp out sideways—not upward—so the two retaining pins release from their grommets without breaking.
  4. Disconnect the harness: press the square tab on the connector underside to release it, then twist each bulb socket 1/4 turn and pull it from the factory lamp.
  5. Fit the factory sockets into the new lamp, installing 194 red bulbs in the parking positions, and connect the harness.
  6. Align the dowel pins with the body grommets, thread the three 10 mm bolts (do not over-tighten), refit the bolt covers and liner, and test parking, brake, turn, and reverse on both sides.

Buyer FAQ

Will these fit a 2006-2009 350Z? No. Fitment is 2003-2005 Z33 only. The 2006-2009 350Z uses a different LED tail light assembly.

Do I need to buy bulbs? Two 194 red bulbs for the parking positions are not included. Reuse your factory bulb sockets and the rest of the harness.

Do I splice wiring? No. The lamps are built for plug-and-play connection with no re-wiring.

También te puede interesar