Black Clear Corner Halogen Projector Headlights Pair with Bulbs for GMC Terrain SL SLE SLT (2010-2015)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Black Clear Corner Halogen Projector Headlights Pair with Bulbs for GMC Terrain SL SLE SLT (2010-2015). New driver and passenger replacement assemblies. Match the original housing and factory lighting equipment before ordering.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2010-2015 | GMC Terrain | SL/SLE/SLT factory halogen only; NOT Denali or HID |
Specs
- Sold as: driver and passenger pair
- Housing/style: Black Clear Corner
- Lighting: Halogen Projector
- H1 low-beam and 9005 high-beam bulbs included.
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
- H1 low-beam bulbs
- 9005 high-beam bulbs
Interchange References
GM2502350, GM2503350, 22822697, 22915380, 23319179
Installation: GMC Terrain SL SLE SLT (2010-2015)
Professional installation and beam aiming are recommended. Switch off the lights and ignition before servicing.
- Remove the Terrain engine-bay headlamp cover push clips and T20 grille bolts. Release the two wheel-well T20 screws and two push clips, then carefully release the bumper corner from behind the liner.
- Remove the exposed three 7 mm and one 10 mm headlamp bolts. Lift the two upper tabs, draw the housing out and release the harness safety clip. Transfer the lower bracket using its two T20 screws.
- Seat the replacement guides, reconnect the harness and secure the four lamp bolts. Test both beams and signals before clipping the bumper corner back in and replacing the wheel-well/grille fasteners; have aim checked.
Frequently Asked Questions
Which vehicles and factory lighting equipment are compatible?
2010-2015 GMC Terrain (SL/SLE/SLT factory halogen only; NOT Denali or HID). SL/SLE/SLT with factory halogen headlights only. NOT Denali or factory xenon/HID. Match the clear vertical corners and the original connectors.
Which bulbs are used and included?
H1 low-beam and 9005 high-beam bulbs included.
What access is needed for installation?
The bumper corner is released to reach three 7 mm and one 10 mm headlamp bolts; the bracket is transferred. Professional installation and beam aiming are recommended.