Black Crystal Halogen Headlights Pair for Ford Focus S SE SES SEL (2009-2011)

Replace yellowed or cracked headlights on your 2009-2011 Ford Focus sedan or coupe with this new black crystal halogen pair. Plug-and-play with the factory connectors.

Fitment

Will NOT fit: 2012+ Focus; older Focus wagon/hatch.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low/high beam: 9008 / H13
• Housing: Black
• Lens: Clear
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 9S4Z13008D. Partslink: FO2503269, FO2502269.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights

Installation

1. Open the hood and remove the four push pins from the radiator grille on the side you are working on, then pull the grille up to reach the lower bolt.
2. Remove the three 10 mm bolts and washers from the headlight.
3. Pull the headlight up and forward to release the blind spring clip on the lower outboard side.
4. Unplug the connectors, install the new lamp in reverse making sure the clip engages, and aim the headlights.

Steps compiled from 2008-2011 Ford Focus owner guide and Ford service manual. Professional installation and headlight aiming are recommended.

FAQs

What bulb size do these use?
9008 (H13) low/high beam, per the listing.

Will these fit a 2012 Focus?
No. The 2012 redesign uses a different headlight.

Do I need to remove the front bumper to replace these headlights?
No. On the 2008-2011 Focus the lamp comes out from the top after lifting the grille.

Can I install LED or HID kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.