Black Full LED Headlights Pair for Ford Escape (2023-2025)
$808.95
Ir directamente a la información del producto
Black Full LED Headlights Pair for Ford Escape (2023-2025)
$808.95
DS-PJ6Z13008D
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace cracked or hazy headlights on your 2023-2025 Escape with this brand-new full LED pair with black housing. Bulbs included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2023-2025 | Ford Escape with factory LED headlights | Factory LED headlights |
Will NOT fit: 2020-2022 Escape; 2013-2019 Escape.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam and DRL: built-in LED
- Bulbs included
- Housing: black
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: PJ6Z13008D, PJ6Z13008-D, PJ6Z-13008-C. Partslink: FO2502430, FO2503430.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
Installation
- Raise the vehicle; on both sides remove the push pins and set the fender liner aside, then release the clips and set the front fender moulding aside.
- Remove the engine undershield screws (2 N·m) and the lower bumper screws; disconnect the front bumper cover harness.
- Remove the bumper-cover-to-fender bracket bolts (8 N·m), release the tabs, then remove the screws/clips and lift the cover off with a helper (4 N·m).
- Remove the headlamp screws (4.8 N·m), pull the lamp forward and disconnect it.
- Install the new lamp, reassemble, aim the headlights, and run "BCM > LIN New Module Initialization" with a scan tool if the headlamp has no HCM.
Steps compiled from Ford service procedures "Front Bumper Cover" (501-19) and "Headlamp Assembly" (417-01), Ford Escape, via fordescape4.com. Professional installation and headlight aiming are recommended.
FAQs
Will these fit a 2022 Escape?
No. The 2023 refresh uses different lamps.
Do I need a scan tool?
Ford calls for "BCM > LIN New Module Initialization" on vehicles without a headlamp control module.
Do I need to remove the front bumper to replace these headlights?
Yes. Ford's procedure removes the front bumper cover first.
Can I install HID or LED kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.