Black Full LED Headlights Pair w/ LED Module for Ford F-150 Raptor (2017-2020)

Black Full LED Headlights Pair w/ LED Module for Ford F-150 Raptor (2017-2020)

$992.95
Ir directamente a la información del producto
Black Full LED Headlights Pair w/ LED Module for Ford F-150 Raptor (2017-2020)

Black Full LED Headlights Pair w/ LED Module for Ford F-150 Raptor (2017-2020)

$992.95
DS-GL3Z13008H

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Replace hazy or damaged headlights on your 2017-2020 Ford F-150 Raptor with this new black-bezel full LED pair. Bulbs and LED module included per the listing.

Fitment

Year Make / Model Fits
2017-2020 Ford F-150 Raptor Factory headlights

Will NOT fit: Standard F-150; 2021+ Raptor.

Common Reasons to Replace

  • Yellowed, hazy, or oxidized lenses reducing light output
  • Cracked lens or broken mounting tabs
  • Moisture or condensation inside the housing
  • Collision damage

Specs

  • Low/high beam, DRL, turn: built-in LED
  • Bezel: Black
  • LED module included (per listing)
  • DOT compliant
  • Quantity: Pair (Left + Right)
  • Condition: New

Interchange Part Numbers

OEM: GL3Z13008H, gl3z13008d, gl3z13008f, GL3Z13008C, GL3Z13008E. Partslink: FO2502371, FO2503371.

What's Included

  • 1 x Driver side headlight assembly
  • 1 x Passenger side headlight assembly
  • Left and right headlights

Installation

  1. Open the hood. Remove the clips holding the intake snorkel and the 7 clips on the radiator cover, then lift the cover off.
  2. Remove the clip on top of each headlight bezel, pop the bezel loose and leave it attached at the outer edge.
  3. Remove the 3 shroud clips on each side and the four 10 mm bolts along the top of the grille.
  4. Unplug the grille electrical connectors (grille lights, shutter and front camera if equipped), then release the washer hose and the 2 harness clips.
  5. Remove the two 8 mm bolts at the lower corners of the grille and lift the grille straight out.
  6. Remove the headlamp mounting bolts, unplug the headlamp connector and lift the lamp out.
  7. Install the new headlights in reverse order, test every function and check aim.

Steps compiled from Cobb Tuning F-150 Raptor grille removal guide and Rough Country 2017-2020 Raptor grille kit instructions. Professional installation and headlight aiming are recommended.

FAQs

Will these fit a regular F-150?
No. The listing is for the 2017-2020 Raptor.

Will these fit a 2021 Raptor?
No. The 2021 redesign uses a different lamp.

Do I need to remove the front bumper to replace these headlights?
No. The Raptor grille comes off, then the headlamp bolts.

What bulbs do these use?
None to buy for the headlights. Low and high beams are built-in LED.

Can I install LED or HID kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.

También te puede interesar