Black Halogen Headlights Pair for BMW X3 F25 (2011-2014)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace damaged headlights on your 2011-2014 BMW X3 (F25) with factory halogen headlights with this new black pair. Bulbs are included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2011-2014 | BMW X3 F25 with factory halogen headlights | Factory halogen headlights |
Will NOT fit: Xenon/adaptive cars; 2015+ LCI X3; E83 and G01.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Type: Halogen
- Bulbs: included; match your factory bulbs (reuse them if needed)
- Housing: Black
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 63117222025, 63117222026. Partslink: 63117222025, 63117222026.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
- Bulbs included (per listing)
Installation
- Lever out the expanding rivets and remove the hood seal; remove the Torx screws along the top of the bumper and the 8 mm screws to the underbody panel.
- Remove the wheel-arch liners and fender-flare clips, then the two 10 mm bumper-to-fender bolts per side and the two T30 screws behind the kidney grilles.
- Unplug the parking-sensor/fog/washer connectors and lift the bumper off with a helper.
- Remove the upper and lower headlight bolts, pull the lamp forward, unplug it, install the new lamp aligned to its holder, reverse the steps and aim.
Steps compiled from BMW repair instructions "Removing and installing left (Xenon) headlight" (F-series, via Bimmerfest); Bimmerpost F25 X3 headlight replacement thread (same removal path for halogen lamps). Professional installation and headlight aiming are recommended.
FAQs
Will these fit an X3 with xenon headlights?
No. These are for factory halogen cars only.
Does it fit the 2015-2017 X3?
No. The 2015 LCI uses a different lamp.
Do I need to remove the front bumper to replace these headlights?
Yes. BMW's procedure removes the front bumper to get to the headlight bolts.
What bulb sizes do these use?
The listing images do not state the bulb sizes. Bulbs are included; match your factory bulb sizes if you ever replace them.
Can I install LED or HID kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.