Black Halogen Headlights Pair for Ford F-150 (2018-2020)

New black-housing halogen headlight pair for the 2018-2020 Ford F-150 with factory halogen headlights. H11 low, HB3 high. Bulbs are not included.

Fitment

Will NOT fit: F-150s with factory LED headlights, 2015-2017 or 2021+ F-150, Raptor, or Super Duty.

Common Reasons to Replace

• Yellowed, hazy, or cracked factory lenses cutting light output
• Moisture or condensation inside the housing
• Broken mounting tabs or collision damage
• Refreshing the front end with a new black look

Specs

• Light type: Halogen (H11 low + HB3 high)
• Housing: Black, clear lens
• Bulbs: Low beam H11, high beam HB3, turn signal 7444NA, side marker T10 (bulbs NOT included)
• Lens: Polycarbonate; housing: polypropylene
• DOT & SAE compliant
• Fitment type: Direct replacement, plug-and-play connectors
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: KL3Z-13008-C, KL3Z-13008-D (halogen type) · Partslink: FO2502372, FO2503372

What's Included

• 1 x Driver-side headlight assembly
• 1 x Passenger-side headlight assembly
• Bulbs not included — fits Low beam H11, high beam HB3, turn signal 7444NA, side marker T10

Installation (2018-2020 Ford F-150)

Tools: 10 mm socket and ratchet, push-pin tool.

1. Open the hood and remove the push pins on the radiator support cover.
2. Release the upper grille push pins so the grille edge can flex forward to reach the inboard bolt.
3. Remove the headlight bolts (top and inboard) and pull the lamp forward.
4. Unplug the connector and remove the bulbs if reusing them.
5. Install the new lamp, bolt it in, reconnect and test.
6. Refit the pins and cover, then aim the beams.

Steps based on the Ford F-150 (2015-2020) workshop manual headlamp procedure and F150Forum owner write-ups.

FAQ

Will these replace my factory LED headlights?
No. This pair is for halogen-equipped trucks only. LED-equipped trucks use a different housing and connector.

Will these fit a 2017 F-150?
No. The 2018 refresh changed the headlight shape. This pair is for 2018-2020.

What bulb sizes do these use?
Low beam H11, high beam HB3, turn signal 7444NA, side marker T10 (bulbs NOT included).

Can I put LED bulbs in these?
Yes. These are halogen housings, so H11/HB3 LED conversion kits fit. Use a quality kit with a CANbus decoder if you see flicker or a bulb-out warning, and re-aim the beams after install.