Black Halogen Headlights Pair for Subaru Legacy and Outback (2018-2019)
$381.95
Ir directamente a la información del producto
Black Halogen Headlights Pair for Subaru Legacy and Outback (2018-2019)
$381.95
DS-84001AL10A
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2018-2019 Subaru Legacy and Outback with factory halogen lamps and the 8-pin connector (84001AL10A / 84001AL11A). They will not fit HID, Touring, or 3.6R lamps unless your original housings match these photos, and they will not fit 2010-2014 Legacy or Outback (2010-2014 Legacy and Outback halogen pair) or 2015-2017 lamps. Confirm the connector and the housing shape before you buy.
Replace faded or cracked factory halogen lamps on your 2018-2019 Legacy or Outback with this OE-style black-housing pair. Each lamp has the halogen low and high beam, an amber side marker and the 8-pin factory connector, and it bolts to the factory points and plugs in with no splicing. Reuse your H11 low-beam and 9005 high-beam bulbs, or add new ones.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2018-2019 | Subaru Legacy | Factory halogen, 8-pin. Not HID, Touring, or 3.6R unless the lamps match these photos. |
| 2018-2019 | Subaru Outback | Factory halogen, 8-pin. Not HID, Touring, or 3.6R unless the lamps match these photos. |
Specs
- Sold as: driver and passenger pair
- Housing: black, clear lens, amber side marker, 8-pin connector
- Low beam: H11; high beam: 9005
- Bulbs not included — reuse your bulbs
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side halogen headlight (84001AL10A)
- Passenger-side halogen headlight (84001AL11A)
Interchange References
Replaces the original assemblies commonly crossed with 84001AL10A, 84001AL11A, SU2503162, SU2502162.
Installation: Subaru Legacy and Outback (2018-2019)
On the 2018-2019 Legacy and Outback the front bumper cover has to come off to reach the headlight bolts. Plan on a helper, trim tools and spare bumper clips. Work with a shop manual for your year. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.
- Open the hood. Remove the fasteners across the top of the bumper and grille, the screws in each wheel well and the bolts underneath, then release each bumper corner from the fender.
- With a helper, ease the cover forward, unplug any fog light or similar connectors and set the cover on a soft surface.
- Unplug the 8-pin headlight connector, remove the mounting bolts and lift the lamp out.
- Transfer your H11 and 9005 bulbs if you are reusing them. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plug.
- Refit the bumper, reconnect the battery, and test low beam, high beam and turn signal before you drive. Aim the beams after installation.
Frequently Asked Questions
Will these fit a Touring, 3.6R, or HID Legacy or Outback?
Only if your original housings match these photos and use the 8-pin halogen connector. HID and some Touring / 3.6R lamps are a different housing and will not interchange.
Will they fit 2010-2017 Legacy or Outback?
No. Use the 2010-2014 Legacy and Outback halogen pair for that generation. 2015-2017 lamps are also a different part.
Do I need new bulbs?
No. Reuse your H11 low-beam and 9005 high-beam bulbs, or add new ones. Bulbs are not included.
Do I have to cut or splice wiring?
No. The lamps plug into the factory 8-pin connectors and bolt to the factory points.