Black Halogen Headlights Pair w/ Bulbs for Chevy Silverado 2500HD 3500HD (2020-2023)

Black Halogen Headlights Pair w/ Bulbs for Chevy Silverado 2500HD 3500HD (2020-2023)

$247.95
Ir directamente a la información del producto
Black Halogen Headlights Pair w/ Bulbs for Chevy Silverado 2500HD 3500HD (2020-2023)

Black Halogen Headlights Pair w/ Bulbs for Chevy Silverado 2500HD 3500HD (2020-2023)

$247.95
DS-84738616

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Replace damaged headlights on your 2020-2023 Chevy Silverado 2500HD or 3500HD with factory halogen headlights with this new black pair. H11, H9 and 7443NA bulbs are included.

Fitment

Year Make / Model Fits
2020-2023 Chevrolet Silverado 2500HD / 3500HD with factory halogen headlights Factory halogen headlights

Will NOT fit: Trucks with factory LED headlights (see our LED version); 2024+ HD and 2015-2019 HD (see our versions); Silverado 1500.

Common Reasons to Replace

  • Yellowed, hazy, or oxidized lenses reducing light output
  • Cracked lens or broken mounting tabs
  • Moisture or condensation inside the housing
  • Collision damage

Specs

  • Bulbs: H11 and H9 headlight bulbs (included, per listing photo)
  • Turn signal: 7443NA (included, per listing)
  • Housing: Black
  • DOT compliant
  • Quantity: Pair (Left + Right)
  • Condition: New

Interchange Part Numbers

OEM: 84738616, 84653965, 84685640, 84695495, 84725318, 85133184, 84653966, 84685641, 84695496, 84725319, 84738617, 85133185. Partslink: GM2502504, GM2503504.

What's Included

  • 1 x Driver side headlight assembly
  • 1 x Passenger side headlight assembly
  • Left and right headlights
  • H11, H9 and 7443NA bulbs (included, per listing)

Installation

  1. Open the hood, remove the two T15 screws at the hood latch and the ten clips holding the radiator upper shield, and lift it off.
  2. Unplug the grille-mounted connectors and front camera if equipped, then remove the grille: four 10 mm bolts across the top and two on each side.
  3. Remove the fender-liner screws and the corner screw at each end and take off the side bumper panel to expose the lower headlamp bolt.
  4. Remove the three 10 mm headlamp bolts, lift the lamp off its upper bracket, unplug it, install the new lamp and reverse; aim the headlights.

Steps compiled from Ranch Hand 2020+ Silverado/Sierra HD grille-guard install guide (grille and headlamp access); GM service procedure. Professional installation and headlight aiming are recommended.

FAQs

Will these fit a 2024 Silverado HD?
No. The 2024 refresh changed the front end; see our 2024-2026 version.

Will these fit a truck with LED headlights?
No. These are for factory halogen trucks.

Do I need to remove the front bumper to replace these headlights?
Usually not the full bumper. The upper shield, grille and side bumper panel come off to reach the headlamp bolts.

What bulbs do these use?
Per the listing photo, H11 and H9 headlight bulbs and 7443NA turn bulbs are included.

Can I install LED or HID kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.

También te puede interesar