Black Halogen Headlights Pair w/ Corner Lamps for Ford Crown Victoria (1998-2011)

New black halogen headlights, sold as a driver-side and passenger-side pair for the 1998-2011 Ford Crown Victoria application listed below.

Fitment

Specs

• Condition: New
• Sold as: Left and right pair
• Style: Black
• Lighting type: Halogen
• Bulb application: 9007 combined high/low beam; 3457A corner signal
• Bulbs not included

Shop by bulb size: 9007 | 3457A

In the Box

• 1 driver-side headlight
• 1 passenger-side headlight
• 1 driver-side corner signal lamp
• 1 passenger-side corner signal lamp

Interchange References

XW7Z15A201BB, XW7Z15A201AB, FO2503200, FO2521147, FO2520147

Installation: 1998-2011 Ford Crown Victoria

Professional installation and beam aiming are recommended.

1. Open the hood and release the three twist-type clips on the upper close-out panel above the lamps, then lift the panel back for access. No bumper removal is needed on this body style.
2. Pry up the two retaining tabs that anchor each headlight, then draw the headlight and corner lamp forward. Unplug the 9007 headlamp bulb connector and twist out the 3457A-type corner/signal socket.
3. Before fitting the new set, match the adjuster screw positions to the old housings for a preliminary aim. Install compatible bulbs, route the sockets straight back, seat the housing and push both tabs fully down. Refit the close-out panel clips, test all functions and fine-tune the aim.

Frequently Asked Questions

What should I check before ordering?
Fits 1998-2011 Ford Crown Victoria. Not compatible with Police Interceptor models equipped with strobe-light corner lamps. Bulbs are not included.

Are bulbs included?
No. This package contains the headlight assemblies only; bulbs are not included.

What access is needed to replace the assemblies?
Open the hood and release the three twist-type clips on the upper close-out panel above the lamps, then lift the panel back for access. No bumper removal is needed on this body style.